|
|
3 DIAGNOSIS Pneumatic gearbox components 4-2 FAULT: SPLITTERING IMPOSSIBLE Possible cause Remedy Air pressure too low Check pneumatic system GV valve defective or incorrectly set Check and adjust/replace, if necessary Wrong relay valve fitted for splitter Fit correct relay valve type Broken or incorrectly connected air pipes Check air pipes and replace or connect properly, Wrong selector switch on gear lever Fit correct switch type Wrong bore hole plugged in splitter cylinder Plug correct bore hole Splitter cylinder is not functioning Check cylinder and replace, if necessary FAULT: SPLITTER CYLINDER OPERATES IN REVERSE MODE Possible cause Remedy Incorrect splitter relay valve fitted Fit correct relay valve type Incorrect gear lever shifting valve fitted Fit correct shift valve type Air pipes connected incorrectly Check air pipes and connect properly, if FAULT: SPLITTERING DELAYED Possible cause Remedy Air pressure too low Check pneumatic system Blocked air pipes Check pipes GV valve defective or incorrectly set Check valve and adjust, if necessary 1 ǹ 0002 |