|
|
Content .. 1320 1321 1322 1323 ..
TEST ACTION APPLICABILITY 2 With the DRBIII t, check for other transmission DTC’s Is the DTC P0841 present also? All Yes → Refer to the Transmission category and perform the appropriate symptom. No → Go To 3 3 With the scan tool, check the DTC EVENT DATA for P1776. All Yes → This indicates the shift lever and the manual control valve were in an invalid position between Neutral and OD. Check the shifter No → Go To 4 4 With the DRBIII t, Check the STARTS SINCE SET counter for P1776. NOTE: This counter only applies to the last DTC set. All Yes → Go To 5 No → Go To 11 5 Turn the ignition off to the lock position. t monitor the L/R Pressure Switch State while pressing the Pressure Switch Test button on the Transmission Simulator. All Yes → Go To 6 No → Go To 7 289 TRANSMISSION - NGC P1776-SOLENOID SWITCH VALVE LATCHED IN LR POSITION — Continued |