TEST
ACTION
APPLICABILITY
2
WARNING: TO AVOID PERSONAL INJURY OR DEATH, TURN IGNITION
OFF, DISCONNECT THE BATTERY AND WAIT TWO MINUTES BEFORE
PROCEEDING.
Disconnect the Right Curtain or Seat Airbag connector(s).
NOTE: Check connectors - Clean and repair as necessary.
WARNING: TO AVOID PERSONAL INJURY OR DEATH, DO NOT PLACE AN
INTACT UNDEPLOYED CURTAIN AIRBAG FACE DOWN ON A HARD SUR-
FACE, THE AIRBAG WILL PROPEL INTO THE AIR IF ACCIDENTALLY
DEPLOYED.
Connect the appropriate Load Tool to the Right Curtain or Seat Airbag connector(s).
WARNING: TO AVOID PERSONAL INJURY OR DEATH, TURN IGNITION
ON, THEN RECONNECT THE BATTERY.
With the DRBIII
t, read active Airbag Control Module DTC’s.
Does the DRBIII
t display RIGHT CURTAIN OR SEAT SQUIB SHORT TO
GROUND?
All
Yes
→ Go To 3
No
→ Replace the Right Curtain or Seat Airbag in accordance with
Service Instructions.
Perform __AIRBAG VERIFICATION TEST - VER 1.
3
WARNING: TO AVOID PERSONAL INJURY OR DEATH, TURN IGNITION
OFF, DISCONNECT THE BATTERY AND WAIT TWO MINUTES BEFORE
PROCEEDING.
Disconnect the Airbag Control Module connector(s).
Disconnect the Load Tool from the Right Seat Airbag connector(s).
NOTE: Check connectors - Clean and repair as necessary.
WARNING: TO AVOID PERSONAL INJURY OR DEATH, DO NOT PLACE AN
INTACT UNDEPLOYED CURTAIN AIRBAG FACE DOWN ON A HARD SUR-
FACE, THE AIRBAG WILL PROPEL INTO THE AIR IF ACCIDENTALLY
DEPLOYED.
Connect the appropriate Load Tool ACM Adaptor to the ACM connector(s).
Measure the resistance of the Right Curtain or Seat Squib Line 1 and Line 2 circuits
between the Right Curtain or Seat Squib connector and ground.
Is the resistance below 10K ohms on either circuit?
All
Yes
→ Repair Right Curtain or Seat Squib Line 1 or Line 2 short to
ground.
Perform __AIRBAG VERIFICATION TEST - VER 1.
No
→ Go To 4
281
AIRBAG
RIGHT CURTAIN OR SEAT SQUIB SHORT TO GROUND —
Continued