|
|
Content .. 1015 1016 1017 1018 ..
TEST ACTION APPLICABILITY 10 Using the schematics as a guide, inspect the wiring and connectors. Repair as All Repair Replace the Powertrain Control Module per the Service Informa- t PERFORM QUICK LEARN AND REPROGRAM PINION FACTOR. 11 The conditions necessary to set the DTC are not present at this time. t, check the EATX EVENT DATA to help identify the conditions in which the DTC was set. All Yes → Repair as necessary. Perform 40/41TE (NGC) TRANSMISSION VERIFICATION No → Test Complete. 100 TRANSMISSION - NGC P0760-OD SOLENOID CIRCUIT — Continued |