BYD M6. Service Manual - part 8
BYD M6 AUTO Owner’s Manual
Sound System (if equipped)
1 Eject
2 FM
4 CD
5 AUX
6 Volume adjustment
7 Power
8 Presetting
9 Sound effect adjustment
10 Manual tuning
11 USB
12 Scan
13 Seek-
14 Seek+
Sound System 2-2
BYD M6 AUTO Owner’s Manual
Multimedia System (if equipped)
1. Sound main menu
2. Picture quality adjustment
3. Product information
4. Cell phone
5. Power/volume
6. Eject
8. DVD
9. FM1
10. Seek-
11. FM2
12. Seek+
13. Cell phone MP3
14. Manual scanning
15. Navigation
16. TV
17. Navigation map card
Sound System 2-3
BYD M6 AUTO Owner’s Manual
AM/FM Radio
When the radio signal is weak, ST will
next or previous radio station starting
flicker on the screen.
from the current frequency. The
Sound system on the vehicle allows
seeking will stop when it reaches a
you to listen to AM/FM radio. You can
Select Radio Station
radio station with strong signal.
save your favorite radio stations with
Five ways are available for you to
the number presetting buttons.
Scanning with preview
search radio station on the selected
Radio Operation
waveband: manual scanning, auto
This function will play all the saved
scanning, scanning with preview, auto
radio stations on all wavebands for
You can operate the sound system
scanning and saving, or number
previewing. Press Scan to enable this
only when the ignition switch is at
presetting button.
function. SCAN will be displayed on
ACC (I) or ON (II).
the screen. The radio will go to the
Manual scanning
Press Power/Volume and AM/FM
first preset station and play for some 5
button to turn on the radio system.
You can use manual scanning knob to
seconds. If you do not make any
Turn Power/Volume button to adjust
search for radio stations. Rotate it
operation, it will go on to the next
the volume.
clockwise to go to high frequency, and
preset station. When you reach your
anticlockwise to low frequency. Stop
desired station, press Scan to stop
The last received radio waveband will
the knob when the display shows you
scanning.
be displayed. Press AM or FM button
have reached you desired frequency.
to change the waveband. Press FM
Presetting
button repeatedly to switch between
Auto scanning
You can save your favorite radio
FM1, FM2 and FM3. Press AM button
Auto scanning can automatically
stations on six number presetting
repeatedly to switch between AM1
search for the radio station with strong
buttons. Each number button from 1-6
and AM2.
signal on a certain waveband. Press
When you are listening to stereo radio,
Seek- or Seek+ to enable this function.
waveband
(AM1, AM2) and three
ST will be displayed on the screen.
The radio system will search for the
frequencies on FM waveband (FM1,
Sound System 2-4
BYD M6 AUTO Owner’s Manual
FM2, FM3).
Auto scanning and saving
Adjust Volume
Save a radio station in the following
Long press Scan for 2 seconds, the
Bass, treble, balance and fader are
steps:
system will search for radio stations
adjustable. Press the sound effect
with strong signal and respectively
adjustment button (AUDIO) to select
1.
Select an AM/FM waveband.
save them to FM1, FM2, FM3 or AM1,
your desired mode. The mode will
2.
Use manual scanning, auto
AM2. To turn on this function, long
switch between bass
(BAS), treble
scanning or scanning with
press the Auto Scanning and Saving
(TRE), balance (BAL) and fader (FAD)
preview to reach your desired
(Scan) button. SCAN will be displayed
in turn when you press the AUDIO
radio station.
on the screen and flickers at 1 Hz.
button repeatedly. After one circle,
3.
Select a presetting button
(1-6)
You can save 12 AM radio stations
press AUDIO button and the screen
on which you want to save the
and 18 FM radio stations on number
will return to the current mode. When
radio station, and press it for 2
keys (1-6). And you can listen to the
the mode is changed, the mode name
seconds to save the current radio
saved radio channels through the
will be displayed on the screen.
station to the presetting button.
number keys
(1-6). You can also
Balance/Fader
4.
You can save
12 AM radio
overwrite the radio stations previously
stations and 18 FM radio stations
saved in the number keys. The
These two modes can adjust the
by repeating step 1-3 above.
procedure to overwrite a radio station
sound intensity of each speaker. Use
is the same with that of saving a radio
Balance to adjust balance between
Once a radio station is saved, you can
station to a number key.
the left and right speakers, and use
listen to it by simply pressing the
Fader to adjust balance between the
corresponding number button.
front and rear speakers.
If the battery on the vehicle is
Press AUDIO button to select Balance
depleted or disconnected, or if the
or Fader mode.
radio fuse is removed, all preset radio
stations will be cancelled.
Turn the volume knob to adjust
Sound System 2-5
BYD M6 AUTO Owner’s Manual
Balance or Fader to your desired level.
Electronic Clock
For example:
The current setting is displayed in
1:06 will be set to 1:00.
When the ignition switch is at ACC or
numbers.
1:52 will be set to 2:00.
ON, the clock is displayed on the
Treble/Bass
sound system screen. To set up the
If the clock on a new vehicle is not set
clock, long press AUDIO
(Clock)
up, or after the battery is
These two mode can adjust the
button for 2 seconds, when you hear
disconnected or depleted, the time
timbre.
a prompt tone, the system enters the
display will flicker to remind you to set
Press AUDIO button to select TRE or
clock setup mode. Press the H end
up the clock.
BAS mode.
(presetting 4) of the strip button until
the hour value reaches the current
Turn the volume knob to adjust the
time; press the M end (presetting 5)
timbre to your desired level. The
until the minute value reaches the
current setting is displayed in
current time.
numbers.
Under clock setup mode, press R end
If there is no operation on the volume
(presetting
6) to quickly set up the
knob for 3 seconds, the system will
clock to the beginning of the next or
return to the selected sound mode.
previous hour. If the minute value is
within 30, the hour value will be set to
the previous hour. If the minute value
is above 30, the hour value will be set
to the next hour.
Sound System 2-6
BYD M6 AUTO Owner’s Manual
Operation of USB / AUX
Play a CD
Interface (if equipped)
When playing a CD disc, the ignition
This system can play music files in
switch shall be at ACC (I) or ON (II).
the speakers, including MP3/WMA
The CD disc can be operated with the
files on an external USB disk, and
controller used for the radio operation.
audio signals input through AUX
interface.
AUX/USB interface
Press CD button to select the CD
player. When playing a CD, the
When you insert a USB device, the
NOTICE
screen will show CD and the track
system will switch to USB mode and
number. The system will continue to
y
To prevent damage to USB
detect music files. If any is detected, it
play the CD until you change the
devices, it is recommended to
starts playing music. The operations
mode.
use the data cable supplied with
for music on a CD are also available
the vehicle for connection.
for
USB/AUX music, including
Insert a CD partway into the slot, label
play/pause,
previous/next,
fast
y
USB cannot support certain
side up. The drive will pull it in and
forward/fast rewind.
USB devices
due
to
begin to play music. When all music
on the CD is played, the system will
compatibility
and capacity
Using a data cable, you can connect
replay the CD from the first track.
issues.
the system to the earphone port or
AUX interface of an external music
player, such as a MP3 player, so that
you can play the music in the car
speakers.
Sound System 2-7
BYD M6 AUTO Owner’s Manual
NOTICE
When playing a disc, press the
SEEK+ button for fast forward, long
AM/FM button to switch to radio mode.
press SEEK- for fast backward.
y
Do not add any label to a CD.
Press the CD button to switch to CD
Release the button to resume playing
The label may peel off and
mode again, resuming playing from
when reaching the desired position.
damage the player.
the position where you stopped.
Press SEEK+ button to skip forward
y
Do not insert an 8 cm (3 inch)
to the next track. Press SEEK- button
When playing a CD, if you turn off the
disc in the CD player. Only use
to replay the current track. Press
sound system through the PWR/VOL
standard CD discs. CD of any
SEEK- twice to skip backward to the
knob or ignition switch, the disc will be
other size may be jammed in the
previous track.
left in the drive. When you turn on the
drive or cause other troubles.
CD player again, the playing will be
When playing a CD, you can operate
y
Do not get the sound system
resumed from the position where you
such functions as REPEAT, RANDOM
wet.
stopped. Press the Eject button to
PLAY and SCAN.
y
Do not insert any thing other
eject the CD disc from the drive.
SCAN
than a standard CD disc into the
If you do not take out the disc in 10
CD player.
When enabling SCAN, the system will
seconds, the CD will be pulled in
y
The speakers may make noise
preview all music tracks in turn. To
again. Press the CD button to play the
when there
is
mobile
enable this function, press the
disc.
communication equipment in
number key 3 in CD mode. SCAN will
use nearby.
When playing a CD, you can select or
be displayed on the screen. The
change music track with the Auto
system will play the first track for
For better audio performance, only
Scanning/Skipping button (SEEK).
some 10 seconds. If you do not make
use high quality CD disc with a “For
any operation, it will go on to play the
When playing a music track, long
Use of Sound System” mark.
other tracks for some 10 seconds in
press SEEK+/SEEK- buttons to go
turn. When reaching your desired
CD player cannot play a CD-RW disc.
fast forward/backward. Long press
track, press the number key 3 again
Sound System 2-8
BYD M6 AUTO Owner’s Manual
to resume playing.
CD Maintenance
Repeat
To enable this function, press the
number key 2 in CD mode. RPT will
be displayed on the screen as a
prompt. The system will play the
current track repeatedly. Press the
number key 2 again to cancel this
function.
Random Play
When not in use, keep CD discs in a
This function will play all tracks on a
box to avoid dust or other stains. To
Hold a CD by the edge. Do not touch
CD in random, rather than sequential,
avoid deformation, keep CD discs
its surfaces. Do not attach any
order. To enable this function, press
away from direct sunlight or overheat.
stabilizing ring or sticker on a CD disc.
the number key 4 in CD mode. RDM
Prevent a CD from being stained by
Clean a CD disc with a piece of clean
will be displayed on the screen. The
fingerprints or ink, or the CD may be
and soft cloth. Wipe the disc outward
music will be played in random order.
jammed in the drive or may not be
from the center.
Press the number key 4 again to exit
played normally.
the Random Play mode.
Sound System 2-9
BYD M6 AUTO Owner’s Manual
Steering Wheel Control of
Use Mode button to change the
function mode. Press the button
Sound
System
(if
repeatedly to switch between FM, AM,
equipped)
CD playing (if a CD is loaded), MP3
playing
(if
.mp3 files are available
through the USB interface) and audio
playing
(if an external player is
connected to the AUX interface).
The channel buttons
“∨” and “∧”
have the same functions as SEEK+
and SEEK-. When listening to radio,
The inner and outer edges of a new
press ∧ to search for the next radio
CD may have burrs. The burrs may
station with strong signal, press ∨ to
fall off in the CD drive, which may
search for the previous radio station
cause track skipping or other troubles.
with strong signal.
Rub the CD edges with the side of a
There are 3 buttons on the left of the
If you are playing a CD or files on a
pen or pencil to remove the burrs.
steering wheel hub for setting the
USB device, press ∧ to skip to the
sound system. You can operate the
next track; press
∨ to restart the
Do not let any foreign matters enter
basic functions of the sound system
current track; press ∨ twice to skip to
the CD drive.
without getting your hands away from
the previous track. The album name
the steering wheel.
and track number will be displayed on
Use volume buttons “+” and “-” to
the screen.
adjust the volume. Press and hold a
In AUX playing, the channel buttons
volume button until you get the
do not function.
desired volume level.
Sound System 2-10
BYD M6 AUTO Owner’s Manual
Chapter 2 Sound and A/C System
2.2. Air Conditioning (A/C) System
Front A/C System
2-12
Rear A/C System
2-24
Air Conditioning (A/C) System 2-11
BYD M6 AUTO Owner’s Manual
Front A/C System
1. Outside Button
2. OFF Button
3. Driver’s Side/Outside Temperature (°C)
4. Fan Speed Display
5. Fan Speed Regulating button
6. Front A/C Air Delivery Mode Display
7. Rear A/C Air Delivery Mode Display
8. Mode Button (air delivery mode selection)
9. Front Passenger Side/Rear Temperature
(°C)
10. Pollen Removal Mode Button
11. Rear Seats Button
12. Front Defroster Button
13. Air Intake Mode Selection Button
14.
Button
15. Separate Control Button
16. AUTO Button
17. Temperature Button
18. Front Passenger/Temperature Button
Air Conditioning (A/C) System 2-12
BYD M6 AUTO Owner’s Manual
Control Operation
y When the temperature is set to the
SPEED REGULATING Button
lower limit (LO)/upper limit (HI), the
Press an appropriate fan speed
A/C system will operate under full
regulating button to set up the fan
cooling/heating mode, disabling
speed: the higher the fan speed, the
the AUTO mode.
more air will be cooled. Press the + or
When the temperature is set to
- button to increase or reduce the fan
anywhere between the LO and HI, the
speed.
AUTO button
A/C system can control the inside
temperature under AUTO mode.
Press OFF button to turn off the fan.
Press AUTO button for automatic A/C
operation. The indicator will turn on
To eliminate the frost or fog on the
You can set up the temperature with
indicating that A/C system is on
inside of windshield, set the fan to
manual control.
automatic mode.
high speed.
The A/C system will automatically turn
on/off and select appropriate fan
speed and air delivery mode.
OFF button
If you press any manual control button
in AUTO mode, the corresponding
Press the OFF button to turn off the
parameter will be set up while the
A/C system.
other parameters remain under
automatic control.
Low speed
High speed
Air Conditioning (A/C) System 2-13
BYD M6 AUTO Owner’s Manual
Outside Button
and front passenger. The indicator
both the driver and front passenger.
will turn on when selecting the
If you press the Outside button, the
Press 〈 to reduce the temperature,
Separate mode;
outside temperature will be displayed
press 〉 to increase the temperature.
y Associated mode: the tempera-
on screen at the driver’s side.
ture at the driver and front
When the temperature reaches the
Press the Outside button again to
passenger sides are set to the
lower limit, LO will appear on the
display the temperature setting.
same. The indicator will go out
screen; when it reaches the upper
under associated mode.
limit, HI will appear on the screen.
You can also press the Temperature
button to turn off the outside
Under associated mode, when you
temperature display.
press the temperature control button
for the front passenger side, the A/C
system will switch to separate mode.
FRONT PASSENGER/Temperature
Button
Separate Control Button
Under separate mode, use this button
You can use this button to separately
to adjust the temperature of the front
Temperature Button
control the temperature at the driver
passenger side.
and front passenger side.
Under separate mode, use this button
Under rear mode, use this button to
to adjust the temperature of the driver
You can switch between separate
adjust the temperature of rear seats.
side.
mode and associated mode.
Press 〈 to reduce the temperature,
Under associated mode, use this
y Separate mode: temperature is
press 〉 to increase the temperature.
button to adjust the temperature for
selected separately for the driver
Air Conditioning (A/C) System 2-14
BYD M6 AUTO Owner’s Manual
When the temperature reaches the
1.
- This mode directs air to the
2.
- This mode directs half of
lower limit, LO will appear on the
instrument panel outlets.
the air to the instrument panel outlets
screen; when it reaches the upper
and the remaining air to the floor
limit, HI will appear on the screen.
outlets.
Mode Button
Press Mode button to select an air
delivery mode.
Under AUTO mode, do not operate
this button unless you want to change
the air delivery mode.
Air Conditioning (A/C) System 2-15
BYD M6 AUTO Owner’s Manual
AIR INTAKE Mode SELECTION
3.
- This mode directs most of
4.
- This mode directs most
Button
the air to the floor outlets.
of the air to the floor outlets and front
windshield.
1. Interior circulation - the air inside
the vehicle will be recirculated.
2. Exterior circulation - this mode will
draw air from outside for circulation.
Press this button, the green indicator
will turn on, indicating the air intake
mode is at interior circulation; press
this button again, the green indicator
will go out, indicating the air intake
mode is at exterior circulation.
Button
Press
button to turn on the A/C
compressor, and the
indicator
will turn on. Press the button again to
turn off the compressor.
Air Conditioning (A/C) System 2-16
BYD M6 AUTO Owner’s Manual
Front Defroster Button
Pollen Removal Mode button
When you press this button, the
The vehicle has pollen removal
indicator on it will turn on and most of
function. When enabling this mode,
the air will be directed to the
the wind from the air outlets will blow
windshield. Press this button again,
away pollen for the driver and front
Under AUTO mode, the
button is
the indicator will go out and system
passenger.
at off by default with the indicator
will return to the previous air delivery
remaining off, but the compressor is
Press the Pollen Removal Mode
under automatic control.
mode.
button, its indicator and the indicator
Press this button to turn on the
on the
button will turn on; at this
defroster and A/C system. That is, no
time the A/C system is at interior
circulation mode and most of the air is
matter whether the
button is
directed to the instrument panel
pressed, its indicator will turn on and
outlets.
the front view will become clear
quickly.
Press this button again, the pollen
removal function will be turned off with
the indicators going out.
Air Conditioning (A/C) System 2-17