|
|
|
2. From the passenger side with the door open, move
the two side locking handles towards each other and
lift the top from the retainers.
3. Roll up the soft top to the center of the vehicle, repeat
the procedure on the driver’s side of the vehicle.
4. Remove the soft top with both sides rolled up.
Side Locking Handles
Soft Top Removal
3
GETTING TO KNOW YOUR VEHICLE
45
5. Place the pin buffer over the front locking handle
pins
to
prevent
damage
to
the
soft
top
during
storage.
6. Store the top in the storage bag that is provided.
Installing The Soft Top
To install the soft top, proceed as follows:
1. With the doors open, take the soft top and place it in
center of the vehicle.
2. Unfold the top and be sure to position the front edge
(red strip) under the spoiler of the vehicle.
Soft Top Removal
1 — Pins
2 — Pin Buffer
Installing Top Under The Vehicle Spoiler
1 — Spoiler
2 — Red Strip
46
GETTING TO KNOW YOUR VEHICLE
3. As the side beam is unrolled, engage the two fixed
locating pins (1 front, 1 rear) into their retainers.
4. Move the side locking handles inward.
Locating Pins Seating In The Vehicle
Unlocking The Side Beam
3
GETTING TO KNOW YOUR VEHICLE
47
5. Rotate down the side beam.
6. Release the handles and complete the rotation to lock
the soft top.
Rotating The Side Beam Down
Soft Top In Locking Position
48
GETTING TO KNOW YOUR VEHICLE
|
|
|