Acura TSX / Honda Accord CL. Manual - part 921

Fig. 31: Checking The Release Bearing 

4. Apply super high temp urea grease (P/N 08798-9002) to the release fork (A), the release fork bolt (B), the 

release bearing (C), and the release bearing guide (D) in the shaded areas. 

 

2004 Acura TSX 

2004 CLUTCHES TSX

  

 

Fig. 32: Applying Super High Temp Urea Grease 

5. With the release fork slid between the release bearing pawls, install the release bearing on the mainshaft 

while inserting the release fork through the hole in the clutch housing.  

6. Align the detent of the release fork with the release fork bolt, then press the release fork over the release 

fork bolt squarely.  

7. Install the release fork boot (E). Make sure the boot seals around the release fork and clutch housing.  

8. Move the release fork (A) right and left to make sure that it fits properly against the release bearing (B) 

and that the release bearing slides smoothly. 

 

2004 Acura TSX 

2004 CLUTCHES TSX

  

 

Fig. 33: Installing The Release Bearing & The Release Fork

 

2004 Acura TSX 

2004 CLUTCHES TSX

  

 

2004 AUTOMATIC TRANSMISSIONS

Diagnosis - MCTA 5-Speed 

SPECIAL TOOLS 

Fig. 1: Special Tools (1 Of 2) 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS Diagnosis - MCTA 5-Speed

  

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS Diagnosis - MCTA 5-Speed