Acura TSX / Honda Accord CL. Manual - part 793

Fig. 72: Measuring The Clearance Between The Snap Ring And The 2nd Clutch Guide

3. If the clearance is out of standard, remove the 37 x 58 mm thrust washer and measure its thickness.  

4. Select and install a new thrust washer, then recheck. 

Fig. 73: Thrust Washer Table 

5. After replacing the thrust washer, make sure the clearance is within standard.  

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

6. Disassemble the shaft and gears.  

SECONDARY SHAFT 1ST GEAR CLEARANCE INSPECTION 

Special Tools Required 

Attachment, 42 mm I.D. 07QAD-P0A0100 

1. Install the thrust needle bearing (A), needle bearing (B), 1st gear (C), thrust needle bearing (D), 40 x 51.5 

mm thrust washer (E), 1st/3rd clutch (F), and 3rd gear collar (G) on the secondary shaft (H). 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 74: Exploded View Of Secondary Shaft Components 

2. Install the idler gear (I), then install the ball bearing (J) on the idler gear with the special tool and a press. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX