Acura TSX / Honda Accord CL. Manual - part 156

Fig. 50: Identifying Relay Control Module Connector Terminals 

3. Inspect the connector and socket terminals to be sure they are all making good contact. 

z

If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.  

z

If the terminals look OK, go to step 4.  

4. With the connector still disconnected, make these input tests at the connector: 

z

If any test indicates a problem, find and correct the cause, then recheck the system. 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Multiplex Integrated Control System - TSX

  

 

z

If all the input tests prove OK, the relay control module must be faulty, replace the under-hood 
fuse/relay box.  

Fig. 51: Relay Control Module Input Test

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Multiplex Integrated Control System - TSX

  

 

2004 ACCESSORIES & EQUIPMENT

Navigation System - TSX 

SPECIAL TOOLS 

Fig. 1: Special Tools (1 Of 2) 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX

  

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX

  

 

 

Fig. 2: Special Tools (2 Of 2) 

COMPONENT LOCATION INDEX 

Fig. 3: Locating Navigation System Components 

GENERAL TROUBLESHOOTING INFORMATION 

GENERAL OPERATION 

Refer to the Acura Navigation System Owner's manual, for the navigation system operating procedures.

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX