|
|
YES: Go to step 5. NO: Intermittent failure. The driver's door key cylinder system is OK at this time. Check pin 5. With no driver's door key cylinder operation, select SECURITY from the HDS, and enter the DATA LIST. 6. Check the ON/OFF information of the Driver's Door Key Cylinder Switch (LOCK) and Driver's Door Key Cylinder Switch (UNLOCK) in the DATA LIST. Are both information indicators OFF? YES: Go to step 7. NO: Go to step 10. 7. Turn the driver's door key cylinder to the LOCK and UNLOCK positions with the ignition key and check the ON/OFF information of the Driver's Door Key Cylinder Switch (LOCK) and Driver's Door Key Is the driver's door key cylinder switch (LOCK) (driver's door key cylinder switch YES: Intermittent failure, the door multiplex control unit (power window master switch) is NO: Go to step 8. 8. Disconnect the driver's door key cylinder switch 3P connector. 9. Check for continuity between the No. 3 (LOCK) and No. 1 (UNLOCK) terminals of the driver's door key cylinder switch 3P connector and the No. 8 (LOCK) and No. 21 (UNLOCK) terminals of the power Is there continuity? YES: Faulty driver's door key cylinder switch. NO: Repair an open in the WHT/RED (LOCK) or WHT (UNLOCK) wire.
2004 Acura TSX 2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX
|