Acura RL. Manual - part 628

2007-08 MDX

1. Turn ignition switch to ON (II) position.

2. If engine oil life is not displayed, press the SEL/RESET button on steering wheel repeatedly until the

multi-information display shows blank, SH-AWD and tire pressure.

3. Press and hold SEL/RESET button for more than 10 seconds. The remaining engine oil life reset

mode will be shown on multi-information display.

4. Select RESET by pressing INFO (up or down) button, then press the SEL/RESET button to reset the

engine oil life display. The maintenance item code(s) will disappear, and engine oil life will reset to
"100". If you want to cancel the oil life reset mode, select CANCEL.

2007 RDX

RDX Without Technology Package

1. Turn ignition switch to ON (II) position.

2. Press the Select/Reset knob repeatedly until engine oil life is displayed.

3. Press and hold Select/Reset knob for about 10 seconds. The engine oil life and maintenance item code

(s) will blink.

4. Press Select/Reset knob for another 5 seconds. The maintenance item code(s) will disappear, and

engine oil life will reset to "100".

RDX With Technology Package

1. Turn ignition switch to ON (II) position.

2. Press the SEL/RESET knob on steering wheel until engine oil life is displayed.

3. Press and hold SEL/RESET knob for about 10 seconds. The remaining engine oil life reset mode will

be shown on multi-information display.

4. Select RESET by pressing INFO (up or down) button, then press the SEL/RESET button to reset the

engine oil life display. The maintenance item code(s) will disappear, and engine oil life will reset to
"100". To cancel the oil life reset mode, select CANCEL.

2007-08 RL

1. Turn ignition switch to ON (II) position.

2. If engine oil life minder is not displayed, press the SEL/RESET button on steering wheel repeatedly

until oil life minder is displayed.

NOTE:



If the required service is performed and the display is not reset or
if the display is reset without performing the service, the system
will not show the proper maintenance levels. This can lead to
serious mechanical problems because there will be no record of
when maintenance is needed.



If the indicated maintenance service is not performed and the
remaining engine oil life is less than 0 percent, "SERVICE PAST
DUE" will display, have the service performed immediately and
make sure to reset the display as previously described.

2007 Acura RL

GENERAL INFORMATION Service Reminder Indicators - Acura

Friday, June 05, 2009 2:24:29 PM

Page 15

3. To reset engine oil life, press the up or down arrow button on steering wheel to select RESET on

display, and press SEL/RESET button. To cancel resetting the oil life reset mode, press the up or
down arrow button on steering wheel to select CANCEL on display, and press SEL/RESET button.

4. If reset procedure is completed within 30 seconds after selecting the reset mode, the mode will be

cancelled automatically.

2007-08 TL

1. Ensure all doors are closed. Turn ignition switch to ON (II) position.

2. Press the INFO up or down arrow (located on steering wheel) repeatedly until engine oil life is

displayed.

3. Press and hold the SEL/RESET button for 10 seconds. The multi-information display will ask for a

confirmation. If you are sure you want to reset the display, press SEL/REST button to select OK. If
you do not want to reset the display, press the INFO up or down arrow button to select "Cancel".

2007-08 TSX

1. Ensure all doors are closed. Turn ignition switch to ON (II) position.

2. If engine oil life display is not displayed, press the SEL/RESET button on steering wheel repeatedly

until it comes back.

3. Press and hold the SEL/RESET button on steering wheel for more than 10 seconds. The remaining

engine oil life reset mode will be shown on multi-information display. To reset engine oil life, press
INFO button on steering wheel to select "Reset" on display, and press SEL/RESET button. To cancel
resetting oil life, press INFO button on steering wheel to select "Cancel" on display, and press
SEL/RESET button.

4. If reset procedures is not completed within 30 seconds after selecting the reset mode, mode will be

cancelled automatically.

2008 RDX

1. Ensure all doors are closed. Turn ignition switch to ON (II) position.

2. Press the SEL/RESET knob on steering wheel until engine oil life is displayed.

3. Press and hold SEL/RESET knob for about 10 seconds. The remaining engine oil life reset mode will

be shown on multi-information display.

4. Select RESET by pressing INFO (up or down) button, then press the SEL/RESET button to reset the

engine oil life display. The maintenance item code(s) will disappear, and engine oil life will reset to
"100". To cancel the oil life reset mode, select CANCEL.

TIRE PRESSURE MONITOR SYSTEM

2004 MDX & 2006 TL

TIRE PRESSURE MONITOR WARNING INDICATORS

NOTE:

2007 Acura RL

GENERAL INFORMATION Service Reminder Indicators - Acura

Friday, June 05, 2009 2:24:29 PM

Page 16

If low tire pressure indicator and multi-information display indicator(s) are lit continuously due to low
pressure in one or more tires, adjust tire inflation to proper pressure as indicated on the tire and loading
information placard. The light will remain on until tire pressure is properly set. If warning light is still
illuminated or the TPMS indicator is lit continuously, there is a problem in the TPM system. See appropriate
manufacturer service information.

2005-06 RL

TIRE PRESSURE MONITOR WARNING INDICATORS

If low tire pressure indicator and multi-information display indicator(s) are lit continuously due to low
pressure in one or more tires, adjust tire inflation to proper pressure as indicated on the tire and loading
information placard. The light will remain on until tire pressure is properly set. If warning light is still lit or
the TPMS indicator is lit continuously, there is a problem in the TPM system. See appropriate manufacturer
service information.

2007-08 MDX, RDX, RL, TL & TSX

TIRE PRESSURE MONITOR WARNING INDICATORS

about 50°F (10°C) will change tire pressure by about 1.5 psi (10 kPa). If
temperature drops and then rises, tire pressure could decrease just enough
to turn on the low pressure and tire(s) indicators, but later increase enough
to turn them off. To resolve a complaint of such intermittent indications,
confirm and clear the stored DTC(s) and check the tire pressures. Then
explain to customer how temperature changes can affect the system,
especially when tire pressures are near the low end of the TPMS normal
range at around 24-32 psi (168-220 kPa).

NOTE:

On models equipped with PAX tire systems, if a tire is repaired or replaced,
the warning indicator (and the mileage counter that supports it) must be
reset, no matter how far the vehicle was driven in the run flat mode. See
appropriate manufacturer service information.

NOTE:

Tire pressures will increase slightly as the temperature in the tires rises
during driving at highway speeds. Pressures will also increase or decrease
slightly with changes in outside air temperature. A temperature change of
about 50°F (10°C) will change tire pressure by about 1.5 psi (10 kPa). If
temperature drops and then rises, tire pressure could decrease just enough
to turn on the low pressure and tire(s) indicators, but later increase enough
to turn them off. To resolve a complaint of such intermittent indications,
confirm and clear the stored DTC(s) and check the tire pressures. Then
explain to customer how temperature changes can affect the system,
especially when tire pressures are near the low end of the TPMS normal
range at around 24-32 psi (168-220 kPa).

2007 Acura RL

GENERAL INFORMATION Service Reminder Indicators - Acura

Friday, June 05, 2009 2:24:29 PM

Page 17

manufacturer service information.

2007 Acura RL

GENERAL INFORMATION Service Reminder Indicators - Acura

Friday, June 05, 2009 2:24:29 PM

Page 18

Content .. 626 627 628 629 ..