Acura RL. Manual - part 247

 

  Index      Acura     Acura RL - service repair manual 2005-2008 year

 

Search            

 

 

 

 

 

 

 

  

 

Content   ..  245  246  247  248   ..

 

 

Acura RL. Manual - part 247

 

 

Does the HDS indicate FAILED?  

YES - Go to step 8. 

NO - Intermittent failure, the system is OK at this time. If the HDS indicates NOT COMPLETED, return 
to step 5 and recheck. 

8. Clear the DTC with the HDS.  

9. Select Shift Solenoid A in the Miscellaneous Test Menu, and check that shift solenoid valve A operates 

with the HDS. 

Is a clicking sound heard?  

YES - Go to step 10. 

NO - Replace shift solenoid valve A (see SHIFT SOLENOID VALVE TEST AND 
REPLACEMENT ), then go to step 13. 

10. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five gears, then 

slow down to a stop.  

11. Turn the ignition switch to LOCK (0). Repeat step 10, then go to step 12.  

12. Monitor the OBD STATUS for P0751 or P0752 in the DTCs/Freeze Data in A/T Mode Menu for a 

pass/fail. 

Does the HDS indicate FAILED?  

YES - Repair shift valve A, or replace the transmission, then go to step 13. 

NO - Intermittent failure, the system is OK at this time. If the HDS indicates NOT COMPLETED, return 
to step 10 and recheck. 

13. Clear the DTC with the HDS.  

14. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five gears, then 

slow down to a stop.  

15. Turn the ignition switch to LOCK (0). Repeat step 14, then go to step 16.  

16. Monitor the OBD STATUS for P0751 or P0752 in the DTCs/Freeze Data in A/T Mode Menu for a 

pass/fail. 

Does the HDS indicate PASSED?  

YES - Troubleshooting is complete. 

NO - Return to step 13 and recheck. If the HDS indicates NOT COMPLETED, return to step 14 and 
recheck. 

 

2007 Acura RL 

2005-08 TRANSMISSION Automatic Transmission - RL

  

me 

 

Friday, June 05, 2009 1:18:12 PM

Page 159 

© 2005 Mitchell Repair Information Company, LLC. 

DTC P0756: Shift Solenoid Valve B Stuck OFF; DTC P0757: Shift Solenoid Valve B Stuck ON 

1. Warm up the engine to normal operating temperature (the radiator fan comes on).  

2. Make sure that the transmission is filled to the proper level, and check for fluid leaks.  

3. Drain the ATF (see step 4 ) through a strainer. Inspect the strainer for metal debris or excessive clutch 

material. 

Does the strainer have metal debris or excessive clutch material?  

YES - Replace the transmission, then go to step 13. 

NO - Replace the ATF (see step 6 ), then go to step 4. 

4. Clear the DTC with the HDS.  

5. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five gears, then 

slow down to a stop.  

6. Turn the ignition switch to LOCK (0). Repeat step 5, then go to step 7.  

7. Monitor the OBD STATUS for P0756 or P0757 in the DTCs/Freeze Data in A/T Mode Menu for a 

pass/fail. 

Does the HDS indicate FAILED?  

YES - Go to step 8. 

NO - Intermittent failure, the system is OK at this time. If the HDS indicates NOT COMPLETED, return 
to step 5 and recheck. 

8. Clear the DTC with the HDS.  

9. Select Shift Solenoid B in the Miscellaneous Test Menu, and check that shift solenoid valve B operates 

with the HDS. 

Is a clicking sound heard?  

YES - Go to step 10. 

NO - Replace shift solenoid valve B (see SHIFT SOLENOID VALVE TEST AND 
REPLACEMENT ), then go to step 13. 

10. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five gears, then 

slow down to a stop.  

NOTE:

Before you troubleshoot, record all freeze data and any on-board snapshot, and 
review General Troubleshooting Information (see GENERAL 
TROUBLESHOOTING INFORMATION ).

 

2007 Acura RL 

2005-08 TRANSMISSION Automatic Transmission - RL

  

me 

 

Friday, June 05, 2009 1:18:12 PM

Page 160 

© 2005 Mitchell Repair Information Company, LLC. 

11. Turn the ignition switch to LOCK (0). Repeat step 10, then go to step 12.  

12. Monitor the OBD STATUS for P0756 or P0757 in the DTCs/Freeze Data in A/T Mode Menu for a 

pass/fail. 

Does the HDS indicate FAILED?  

YES - Repair shift valve B, or replace the transmission, then go to step 13. 

NO - Intermittent failure, the system is OK at this time. If the HDS indicates NOT COMPLETED, return 
to step 10 and recheck. 

13. Clear the DTC with the HDS.  

14. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five gears, then 

slow down to a stop.  

15. Turn the ignition switch to LOCK (0). Repeat step 14, then go to step 16.  

16. Monitor the OBD STATUS for P0756 or P0757 in the DTCs/Freeze Data in A/T Mode Menu for a 

pass/fail. 

Does the HDS indicate PASSED?  

YES - Troubleshooting is complete. 

NO - Return to step 13 and recheck. If the HDS indicates NOT COMPLETED, return to step 14 and 
recheck. 

DTC P0761: Shift Solenoid Valve C Stuck OFF; DTC P0762: Shift Solenoid Valve C Stuck ON 

1. Warm up the engine to normal operating temperature (the radiator fan comes on).  

2. Make sure that the transmission is filled to the proper level, and check for fluid leaks.  

3. Drain the ATF (see step 4 ) through a strainer. Inspect the strainer for metal debris or excessive clutch 

material. 

Does the strainer have metal debris or excessive clutch material?  

YES - Replace the transmission, then go to step 13. 

NO - Replace the ATF (see step 6 ), then go to step 4. 

4. Clear the DTC with the HDS.  

5. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five gears, then 

NOTE:

Before you troubleshoot, record all freeze data and any on-board snapshot, and 
review General Troubleshooting Information (see GENERAL 
TROUBLESHOOTING INFORMATION ).

 

2007 Acura RL 

2005-08 TRANSMISSION Automatic Transmission - RL

  

me 

 

Friday, June 05, 2009 1:18:12 PM

Page 161 

© 2005 Mitchell Repair Information Company, LLC. 

slow down to a stop.  

6. Turn the ignition switch to LOCK (0). Repeat step 5, then go to step 7.  

7. Monitor the OBD STATUS for P0761 or P0762 in the DTCs/Freeze Data in A/T Mode Menu for a 

pass/fail. 

Does the HDS indicate FAILED?  

YES - Go to step 8. 

NO - Intermittent failure, the system is OK at this time. If the HDS indicates NOT COMPLETED, return 
to step 5 and recheck. 

8. Clear the DTC with the HDS.  

9. Select Shift Solenoid C in the Miscellaneous Test Menu, and check that shift solenoid valve C operates 

with the HDS. 

Is a clicking sound heard?  

YES - Go to step 10. 

NO - Replace shift solenoid valve C (see SHIFT SOLENOID VALVE TEST AND 
REPLACEMENT ), then go to step 13. 

10. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five gears, then 

slow down to a stop.  

11. Turn the ignition switch to LOCK (0). Repeat step 10, then go to step 12.  

12. Monitor the OBD STATUS for P0761 or P0762 in the DTCs/Freeze Data in A/T Mode Menu for a 

pass/fail. 

Does the HDS indicate FAILED?  

YES - Repair shift valve C, or replace the transmission, then go to step 13. 

NO - Intermittent failure, the system is OK at this time. If the HDS indicates NOT COMPLETED, return 
to step 10 and recheck. 

13. Clear the DTC with the HDS.  

14. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five gears, then 

slow down to a stop.  

15. Turn the ignition switch to LOCK (0). Repeat step 14, then go to step 16.  

16. Monitor the OBD STATUS for P0761 or P0762 in the DTCs/Freeze Data in A/T Mode Menu for a 

pass/fail. 

Does the HDS indicate PASSED?  

 

2007 Acura RL 

2005-08 TRANSMISSION Automatic Transmission - RL

  

me 

 

Friday, June 05, 2009 1:18:12 PM

Page 162 

© 2005 Mitchell Repair Information Company, LLC. 

 

 

 

 

 

 

 

Content   ..  245  246  247  248   ..