содержание .. 177 178 179 180 ..
Kia Carens. Manual - part 179
10. Measure 3-4 clutch clearance.
A. Measure clearance between snap ring and retaining plate of 3-4 clutch.
B. If clearance is not within specification, adjust it by selecting correct thickness snap ring.
3-4 clutch clearance : 0.051~0.063 in (1.3~1.6 mm)
3-4 clutch snap ring size in (mm)
0.055 (1.4)
0.063 (1.6)
0.071 (1.8)
0.079 (2.0)
0.087 (2.2)
0.134 (3.4)
11. Check clutch operation as follows :
A. Install SST (0K201 190 016) as shown, and check clutch operation by applying compressed air.
Air pressure : 57 psi (392 kPa, 4.0 kg/cm²) maximum
12. Apply petroleum jelly to thrust bearings and secure them to each side 3-4 clutch drum.
Thrust bearing outer diameter
Planetary carrier side : 2.21 in (56.1 mm)
Output shell side : 2.84 in (72.1 mm)