Kia Carens. Manual - part 41

15. Loosen camshaft cap bolts in five or six steps in order shown.

16. Remove camshaft caps.

17. Measure oil clearance.

Oil clearance : 0.0014~0.0031in (0.035~0.081mm)
Maximum : 0.006in (0.15mm)

18. If oil clearance exceeds specification, replace cylinder head.

19. Install camshafts.

20. Place a dial indicator against end of camshaft.

21. Using a prying tool, move camshaft as far forward as possible.

22. Zero dial.

23. Using prying tool, move camshaft as far forward as possible.

24. Check gauge to determine how much end play in present.

End play : 0.0003~0.004in (0.08~0.10mm)
Maximum : 0.008in (0.20mm)

Engine Mechanical System

Cylinder Head Assembly - HLA

( Hydraulic Lash Adjuster )

 

Engine Mechanical System

  2001 > 1.8L DOHC >

 

REMOVAL

1. Remove timing belt.

(Refer to timing belt removal)

2. Remove center cover.

3. Remove ignition coils and high-tension cords.

4. Disconnect PCV hose and ventilation hose.

5. Remove cylinder head cover.

6. Remove camshaft pulleys.

7. Loosen camshaft bearing cap bolts in five or six steps in order shown in figure.