Haima S5. Owners Manual

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

foot-blowing, and defrosting

Press AUTO switch to

A/C system is working under

arrows.

automatically

control

the

automatic mode.

4 - Compressor status display

following functions as per the

● If one of the following

zone for display of current status

selected temperature setting.

knobs or switches is operated

of A/C system.

Airflow temperature

during the automatic running of

5 - AUTO mode status display

Airflow rate

A/C system, the AUTO switch

zone. When the text AUTO is

Selection of air vent mode

indicator lamp goes out and the

displayed, it indicates that the

Selection

A/C system exits fully automatic

A/C system is working under

internal/external recirculation

mode.

fully automatic mode.

Operations of A/C system

Mode button

6 - It displays the actual ambient

(selection of A/C)

Fan control knob

temperature.

Notice: AUTO switch indicator

Windscreen

defroster

Operation instruction

lamp

switch

Control switches

● When the indicator lamp

The A/C system is still

◆ AUTO switch

lights up, it indicates that the

under fully automatic mode if

the knobs or switches other than

Page 144 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

above-mentioned ones are

the current internal and external

counter-clockwise to reduce the

operated.

environments.

temperature.

To run the A/C system

Manual mode - The airflow

Notice:

under fully automatic mode once

rate,

vent

mode,

and

● Setting the temperature at

again, please press the “AUTO”

internal/external

recirculating

hottest or coolest position can’t

button.

mode can be manual adjusted

rapidly achieve the desired

Fully automatic mode

and the A/C system will work

temperature.

Under fully automatic (AUTO)

based on your settings.

● If the heating mode is

mode, once a target temperature

◆ OFF Switch

selected, the system will restrain

is set, the A/C system will

Press the OFF switch to

the airflow, till the airflow is

automatically control the vent

turn off the A/C system.

heated, in order to prevent cool

mode, airflow rate, airflow

◆ Temperature control knob

air from being blown through

temperature, and compressor

This knob controls the

the ventilation port.

cooling need to regulate and

temperature. Rotate clockwise to

Adjust the temperature

maintain the interior temperature

increase the temperature and

control knob to set your desired

at target temperature based on

interior temperature. The setting

Page 145 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

range is “LO”, “18~32ºC”, and

blow the airflow as per your fan

mode, two-way vent mode, and

“HI”.

speed setting.

composite vent mode.

Tip: To achieve best interior

◆ Mode button (MODE)

Press the “defrost defroster

temperature, set the temperature

The A/C system totally has

button” to run under front

near 25ºC. If necessary, adjust to

vent

modes,

namely

defroster vent mode.

desired temperature.

instrument vent mode, floor vent

Notice: When the vent mode is

◆ Fan control knob

mode, two-way vent mode

set at position

and the

The fan has

7 control

(instrument/floor vent mode),

speeds. The selected speed will

composite

vent

mode

temperature control knob is set

be displayed on the display

(floor/defroster vent mode), and

at middle temperature, the

screen. Under fully automatic

defroster vent mode.

heated air is blown towards your

mode,

the

system

can

Press the “MODE” button

feet and the air with lower

automatically adjust the fan

to run the A/C system under

relative

temperature

flows

speed. You may adjust the fan

manual mode and press

through central and side vents.

control knob to run the A/C

repeatedly to switch over among

◆ A/C switch

system under manual mode and

instrument vent mode, floor vent

Page 146 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

When the AUTO switch is

A/C will probably not work.

● External recirculation mode

turned on, press the A/C switch

(The indicator lamp will still

(the indicator lamp is off)

to turn off the A/C system

light up even when the A/C

The outside air will enter

(cooling/dehumidifying

system is turned off).

into the vehicle. This mode is

function). When the fan control

◆ Internal/external

generally used for the ventilation

knob is turned on, press the A/C

recirculation switch

and heating.

switch to turn on or turn off the

This switch controls the air

● Internal recirculation mode

A/C system.

source into the vehicle. Press the

(the indicator lamp is on)

Notice:

internal/external

recirculation

This mode can be used

● Under the AUTO mode, the

switch to switch over between

while driving through tunnels or

A/C system will work and the

external recirculation mode and

heavy traffic area or while

fan will be turned on when the

internal recirculation mode. It’s

requiring fast cooling.

A/C switch is pressed, even

recommended to set this switch

Warning: Do not adopt internal

when the fan is turned off.

to external recirculation mode

recirculation mode under cold or

● When the

ambient

generally.

rainy weathers.

temperature is close to 0ºC, the

Page 147 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

Adopting

internal

the A/C system will be turned on

recirculation mode under cold or

automatically. The A/C system

rainy weathers will lead to mist

will directly dehumidify the air

formation on windows and will

flowing towards the front

be greatly dangerous. Your

windscreen and side windows.

visual field will be obstructed to

The airflow will be increased.

Internal temperature sensor

probably

cause

serious

Notice: The use of temperature

accidents.

control knob can rapidly

◆ Defroster/demister switch

increase the airflow temperature

Press this switch to defrost

and demist the windscreen.

the windscreen and windows.

◆ Sunlight/temperature

◆ Rear defroster function

sensor

Press the defroster/demister

switch. At this position, the

Sunlight sensor

external recirculation mode will

be automatically selected and

Page 148 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

Ambient temperature sensor

VI. Other Configuration and

Exterior rearview mirror

Function

◆ Door Outer Handle

Folding button (optional)

Left/right selection button

The door outer handle for

this series vehicle adopts pull

The automatic thermostatic

structure.

Direction control button

A/C system incorporates the

After the door is unlocked with

functions for measuring the

key or remote control, pull the

interior temperature, ambient

door outer handle to open the

temperature,

and

sunlight

door.

strength so that the system can

adjust the temperature within the

cab accordingly.

The rearview mirror can be

Notice: Do not cover any sensor,

electrically adjusted when the

otherwise the automatic A/C

ignition switch is at position

system can’t work normally.

◆ Exterior Rearview Mirror

ACC or ON.

Page 149 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

Firstly shift the selection

If the exterior rearview

after the exterior rearview mirror

switch

corresponding

mirror comes into interference

is folded.

direction of rearview mirror to

with other obstacles, manually

Precautions for use of exterior

be adjusted and then press the

fold rearward the rearview

rearview mirror

direction control switches to

mirror. If the rearview mirror

● When the movement of the

adjust the angle of rearview

heating function is equipped, the

exterior rearview mirror is

mirror. At completion of the

exterior rearview mirror heating

hindered by ice or solid object,

adjustment, shift the selection

function is working along with

do not adjust the rearview mirror

switch to the neutral position. In

the rear defroster heating

forcibly.

such case, the rearview mirror is

function. (Optional)

● If the mirror surface of

locked at current position.

Notice: It's impossible for the

exterior rearview mirror is

The rearview mirror switch

driver to observe the situation

frozen, do not scrape directly the

folding button

(optional) is

behind the vehicle via the

surface, in order to prevent

functioned to control the folding

exterior rearview mirror after the

damaging the mirror surface.

and extending functions of the

exterior rearview mirror is

◆ Power Window

rearview mirror.

folded. Do not drive the vehicle

Page 150 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

This series vehicle is

Power window lifter

Power window lock

The power window master

switch

equipped with power windows.

switch is located on the auxiliary

Any window can be lifted and

instrument panel. Four power

lowered after the ignition switch

window switches are arranged as

is rotated to position ON. The

per the actual orientation. To

electric control switch of the

(Power window master switch

open any passenger door

window is located on the

and power window lock switch)

window, press the corresponding

armrest of corresponding door.

switch, till the window is

To open the window, press and

lowered to the desired position.

hold the switch of corresponding

To close the window, pull up the

window. To stop the movement

Power window

switch and release after the

auxiliary switch

of window, release the switch.

desired position is reached.

Pull upward the window switch

The driver window is fitted

to close the window.

(Power window auxiliary

with anti-pinch function. To

◆ Power Window Master

switch)

fully close the driver window,

Switch

pull up the window switch with

Page 151 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

a slightly strong force and then

When the anti-pinch function is

function is failed. The learning

release. In such case, the

activated continuously at the

process is to fully close the

window will automatically lift to

third time, the window glass will

driver window and then pull up

the end. To stop the window

drop to the bottom. Lightly pull

the window switch for 3~5s and

midway to prevent the full open

up the window switch within 3s

release to complete the learning

of window, press the window

to fully close the window.

successfully. To protect the

switch. When the upper edge of

To partially open or close

electric system, do not open or

window glass is 4~200mm reach

the driver window, lightly press

close two or more windows at

from the top sealing strip of the

or pull up the window switch.

the same time.

window, if the lifting glass

The window will stop upon the

◆ Power Window Lock

encounters a certain resistance,

release of the switch.

Switch

the anti-pinch function will be

Notice: The learning of the

When the lock switch is at

activated and the window glass

driver window switch anti-pinch

unlocked position, the power

will lower by 150mm. Manually

function is required when a new

windows for all doors can

lift the window only after the

vehicle is finished at the

function normally. When the

foreign material is removed.

production line or the anti-pinch

lock switch is at locked position,

Page 152 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

the orange working indicator

up the switch to close

lamp will light up. In such case,

corresponding window.

only the power window master

◆ Left Combination Switch

switch can function.

The left

combination

◆ Power Window Auxiliary

switch is located on the left side

Switch

of the instrument panel and

(Headlamp adjustment switch)

The

power

window

includes

the

following

auxiliary switch is located on the

functional buttons from left to

passenger door armrest. To

right and from top to bottom:

operate the power window, the

Headlamp adjustment switch,

ignition switch must be at

liftgate switch, ESC OFF switch,

position ON and the power

start-stop switch, and backlight

window lock switch is unlocked.

adjustment switch.

(Liftgate switch)

Press the window switch to open

● Headlamp

Adjustment

corresponding window and pull

Switch

Page 153 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

This switch is functioned to

open the trunk. To close the

trunk, directly close the liftgate

from the outside.

● ESC

OFF

Switch

(Backlight adjustment switch)

(Optional)

(ESC OFF switch)

The headlamp adjustment

This switch is normally

switch is located on the left

under activated status. Press this

combination switch. The angle

switch to turn off this switch. In

of the headlamp height can be

such case, the “ESC OFF” will

adjusted

via

the

vertical

be displayed on the instrument.

adjustment knob to meet the

● Start-Stop

Switch

lighting needs under different

(Optional)

(Start-stop switch)

road conditions. The initial

This switch is normally

position is 0.

under OFF status. Press to

● Liftgate Switch

activate the start-stop function.

Page 154 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

● Backlight

Adjustment

instrument panel to open the

Switch

engine hood lock.

◆ Engine Hood Opening

Afterwards,

move the

Lever

safety hook lever beneath the

engine hood on the front of the

vehicle to lift the engine hood.

Finally, support the engine hood

(Filler cap opening lever)

with strut bar.

The engine hood opening

Before closing the engine

lever is

located on the

hood, ensure that the strut bar is

(Engine hood lock)

instrument panel at the left

fixed and all filler caps within

lower portion of the steering

engine

compartment

are

wheel. When the vehicle is

properly closed and check for

under stopped status, rotate

presence of foreign materials to

upward the opening lever on the

be removed. After closing the

Page 155 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

engine hood, please ensure that

handles are also fitted with

the engine hood is locked.

clothing hooks for the necessary

◆ Filler Cap Opening Lever

use of passengers. At the time of

The filler cap and trunk

use, pull downward the auxiliary

opening lever are located on the

handle. The auxiliary handle will

inner side of threshold at the left

retract

automatically

upon

front lower corner of the driver

release.

seat.

◆ Courtesy

Footboard

(Optional)

Pull up the filler cap opening

The courtesy footboard

Clothing hooks

lever to open the fuel filler cap

(optional) is located on the front

on the left rear side of the body.

The auxiliary handles are

and rear doorsills and will light

To close the filler cap, directly

fitted above the passenger seats.

up automatically when the

close the filler cap from the

The auxiliary handles are fitted

corresponding door is opened.

outside of the vehicle.

with return spring and damper

◆ Sun Visor

◆ Auxiliary Handle

and the rear row auxiliary

Page 156 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

To use the sun visor, pull

of the sun visor. The cosmetic

◆ Sunroof (Optional)

down directly with hand. In

mirror lamp (optional) will light

Open sunroof

Open rear edge

addition, the sun visor can be

up when the mirror cap is

taken out from the middle base

opened.

and pulled to the side face for

use.

The front face of the driver

sun visor is fitted with ticket

clip.

Tip: To ensure the close fit

Sun visor

between the sun visor and

Sun visor cosmetic

cosmetic mirror

mirror cap

ceiling and the safety of

passengers, do not place heavy

The sunroof can open and

object in the ticket clip.

close only when the ignition

Open the mirror cap to use

switch is at position ON. The

Sun visor lamp

the cosmetic mirror on the back

sunroof control switches are

Page 157 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

located on the interior lamp

Press and hold the button

body parts will probably come

panel. The rear edge of the

into collision with other objects

of control panel to open

sunroof can be tilted upward to

to endanger the life safety of the

enhance the ventilation amount.

the sunroof. Release the button

passengers.

Press and hold the rear

after the sunroof reaches desired

While closing the sunroof,

position. Press once to activate

keep the passengers, especially

portion of the button

one-touch opening function.

the hands, head, or even neck of

the control switch to increase the

Press and hold button

child, away from the sunroof.

rear tilting angle of the sunroof.

The negligence will probably

to close sunroof. Press

Press and hold the front portion

lead to blockage by sunroof to

once to activate one-touch

cause serious consequences.

of button

or button

closing function.

Tip: After the cleaning of

During the driving, it’s of

vehicle or during the operations

to close the rear edge of

great danger to protrude the

of sunroof after raining, firstly

sunroof.

head, arms, hands, or other body

wipe clean the sunroof. Do not

part out of the sunroof. These

attempt to open the sunroof

Page 158 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

under the environment below

two positions suitable for

driver, please keep clean the

0ºC or when the sunroof is

daytime

and

nighttime

interior rearview mirror and

covered by ice or snow, or it will

respectively. During daytime

exterior rearview mirrors.

damage the sunroof rails or

driving, shift the anti-dazzling

Tip: To prevent the vision of

motor.

button of interior rearview

interior rearview mirror from

The sun visor will open

mirror to daytime position.

being hindered to impair the

accordingly when the sunroof is

During nighttime driving, shift

driving safety, the luggage and

opened and must be closed

the anti-dazzling button of

sundries shall not be stacked to

manually after the sunroof is

interior rearview mirror to

be higher than the backrest of

closed. After the sunroof is

nighttime position.

rear row seat.

closed, the sun visor can be

Before the driving, properly

◆ Glasses Case (Optional)

opened or closed manually.

adjust the interior rearview

The high-end models with

◆ Interior Rearview Mirror

mirror so that the image through

sunroof are fitted with glasses

The interior

rearview

the rear windscreen is located in

case, which is located between

mirror

fitted

with

the center. To ensure the driving

driver seat and front passenger

anti-dazzling function and has

safety and clear vision for the

Page 159 of 250

Haima S5. Owners Manual - part 10