Vauxhall Movano (2016 year). Manual

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating

141

TC is reactivated by pressing Ø

wheels are braked individually. This

Enhanced Traction function

again. Control indicator Ø

considerably improves the driving

extinguishes.

stability of the vehicle on slippery road

surfaces.

TC is also reactivated the next time

the ignition is switched on.

ESP®^Plus is operational as soon as

the ignition is switched on and control

Fault

indicator b extinguishes in the

instrument cluster. A corresponding

If the system detects a fault, control

message also appears in the Driver

indicator b 3 89 illuminates together

Information Centre (DIC) 3 92.

with A 3 87 in the instrument cluster

and a corresponding message

When ESP®^Plus comes into action b

appears in the DIC 3 92.

flashes.

The Traction control system (TC) is

9 Warning

not operational. Have the cause of the

If necessary, in the event of soft

fault remedied by a workshop.

ground, mud or snow-covered road

Do not let this special safety

Vehicle messages 3 92.

surfaces, ESP®^Plus can be

feature tempt you into taking risks

deactivated to enhance traction:

when driving.

Press Ø on the instrument panel.

Electronic stability program

Adapt speed to the road

The Electronic Stability Program

conditions.

(ESP®^Plus) improves driving stability

when necessary, regardless of the

Control indicator b 3 89.

type of road surface or tyre grip. It also

Trailer stability assist (TSA) 3 155.

prevents the drive wheels from

spinning.

As soon as the vehicle starts to

swerve (understeer/oversteer),

engine output is reduced and the

-------------------------------------------------------------------------------------------------------------------------------------------------------------

142

Driving and operating

Fault

Driver assistance

If the system detects a fault, control

systems

indicator b 3 89 illuminates together

with A 3 87 in the instrument cluster

and a corresponding message

9 Warning

appears in the DIC 3 92.

Driver assistance systems are

The Electronic Stability Program

developed to support the driver

(ESP®^Plus) is not operational. Have

and not to replace the driver's

the cause of the fault remedied by a

attention.

workshop.

The driver accepts full

Vehicle messages 3 92.

responsibility when driving the

Control indicator Ø illuminates in the

vehicle.

instrument cluster and a

When using driver assistance

corresponding message appears in

systems, always take care

the DIC 3 92.

regarding the current traffic

When vehicle speed reaches

situation.

30 mph, the system switches

automatically from Enhanced

Cruise control

Traction function to ESP®^Plus

operation. Control indicator Ø

The cruise control can store and

extinguishes in the instrument cluster.

maintain speeds of 20 mph and

above. Deviations from the stored

ESP®^Plus is reactivated by pressing

speeds may occur when driving uphill

Ø again. Control indicator Ø

or downhill. The stored speed will

extinguishes.

flash in the Driver Information Centre

ESP®^Plus is also reactivated the next

(DIC) 3 92.

time the ignition is switched on.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating

143

For safety reasons the cruise control

Cruise control is now in standby mode

cannot be activated until the brake

and a corresponding message

pedal has been operated once.

appears in the DIC.

Do not use the cruise control if it is not

advisable to maintain a constant

speed.

With manual transmission

automated, only activate cruise

control in automatic mode.

Control indicators m and U 3 91.

Activation

Control indicator m illuminates green

in the instrument cluster together with

U and a corresponding message

appears in the DIC.

Accelerate to the desired speed and

press < or ]. The current speed is

Vehicle speed can be increased by

now stored and maintained and the

depressing the accelerator pedal.

accelerator pedal can be released.

The stored speed flashes in the

instrument cluster. When the

accelerator pedal is released, the

previously stored speed is resumed.

Cruise control remains activated

while gearshifting.

The speed is saved until the ignition

Press m, control indicator U

is switched off.

illuminates green in the instrument

cluster.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

144

Driving and operating

Increase speed

Automatic deactivation:

Cruise control speed limiter

● vehicle speed drops below

With cruise control active, the vehicle

The speed limiter prevents the

20 mph

speed can be increased continuously

vehicle exceeding a preset maximum

or in small increments by holding

● the brake pedal is depressed

speed above 20 mph.

down or tapping < repeatedly.

● the clutch pedal is depressed

Activation

When the switch is released the

● selector lever in N

current speed is stored and

The speed is stored and a

maintained.

corresponding message appears in

Alternatively, accelerate to the

the DIC.

desired speed and store by pressing

Reactivation

Reduce speed

Press R at a speed above 20 mph.

If the stored speed is much higher

With cruise control active, the vehicle

than the current speed, the vehicle

speed can be decreased

will accelerate powerfully until the

continuously or in small increments

stored speed is obtained.

by holding down or tapping ]

repeatedly.

Pressing < will also reactivate the

cruise control function, but at the

Press U, control indicator U

When the switch is released the

current vehicle speed only, not the

illuminates yellow in the instrument

current speed is stored and

stored speed.

cluster.

maintained.

Cruise control speed limiter function

Deleting the stored speed

Deactivation

is now in standby mode and a

Press m: Green control indicators

corresponding message appears in

Press §: cruise control is deactivated

U and m extinguish in the instrument

the DIC.

and the green control indicator m

cluster.

extinguishes in the instrument cluster.

Accelerate to the desired speed and

press < or ]. The current speed is

recorded.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating

145

The vehicle can be driven normally

Release the accelerator pedal and

Yellow control indicator U

but it will not be possible to exceed the

the speed limiter function is

extinguishes in the instrument cluster.

programmed speed limit except in an

reactivated once a speed lower than

emergency.

the limit speed is obtained.

Speed limiter

Where the limit speed cannot be

Notice

maintained, e.g. when driving on a

In vehicles fitted with a Speed

Maximum speed limiter

steep decline, the limit speed will

limiter, fully depressing the

In accordance with local or national

flash in the DIC.

accelerator pedal will not allow you

regulations, the vehicle may be

to exceed the set maximum vehicle

Increase limit speed

equipped with a fixed maximum

speed. Speed limiter 3 145.

speed limiter that cannot be disabled.

The limit speed can be increased

Deactivation

continuously or in small increments

If equipped, a warning label indicating

by holding down or tapping <

Press §: speed limiter is deactivated

the fixed maximum speed limit (55 to

repeatedly.

and the vehicle can be driven

80 mph) is located on the instrument

normally.

panel.

Reduce limit speed

The limit speed is stored and a

Deviations from the maximum speed

The limit speed can be decreased

corresponding message appears in

limit may occur briefly when driving

continuously or in small increments

the DIC.

downhill, for physical reasons.

by holding down or tapping ]

A warning buzzer may sound for

repeatedly.

Reactivation

10 seconds if the vehicle briefly

Press R. The speed limiter function is

Exceeding the limit speed

exceeds the set limit.

reactivated.

In the event of an emergency it is

Vehicles also equipped with cruise

Pressing < will also reactivate the

possible to exceed the limit speed by

control speed limiter: the maximum

speed limiter function, but at the

depressing the accelerator pedal

speed cannot be exceeded by

current vehicle speed only, not the

firmly beyond the point of resistance.

depressing the accelerator pedal

stored speed.

The limit speed will flash in the DIC

firmly beyond the point of resistance.

during this period.

Deleting the limit speed

Cruise control speed limiter 3 142.

Press U.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

146

Driving and operating

Parking assist

Activation

Caution

The parking assist makes reverse

When reverse gear is engaged, the

parking easier by measuring the

system switches itself on

Performance of the sensor can be

distance between the rear of the

automatically. Readiness for

reduced when sensors are

vehicle and obstacles. It is the driver,

operation is indicated by a brief

covered, e.g. by ice or snow.

however, who bears full responsibility

acoustic alarm.

Performance of the parking assist

for the parking manoeuvre.

An obstacle is indicated by buzzers.

system can be reduced due to

The interval between the buzzers

heavy loading.

becomes shorter as the vehicle gets

Special conditions apply if there

closer to the obstacle. When the

are taller vehicles involved (e.g.

distance is less than 30 cm, the

off-road vehicles, mini vans,

buzzer is continuous.

vans). Object identification in the

upper part of these vehicles

9 Warning

cannot be guaranteed.

Objects with a very small reflection

Under certain circumstances,

cross section, like objects of

various reflective surfaces on

narrow size or soft materials, may

objects or clothing as well as

not be detected by the system.

external noise sources may cause

the system to fail to detect

Parking assist will not detect

The system consists of four ultrasonic

obstacles.

objects out of the detection range.

parking sensors in the rear bumper.

Special attention must be paid to

Notice

low obstacles which can damage

Attached parts in the detection area

the lower part of the bumper.

cause system malfunction.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating

147

Deactivation

Permanent deactivation

Caution

Permanently deactivate the system

by pressing and holding

on the

When reversing, the area should

instrument panel for approx.

be free from obstacles which could

3 seconds with the ignition on. Control

impact on the underside of the

indicator in the button illuminates

vehicle.

continuously.

Impact to the rear axle, which may

The system is deactivated and will not

not be visible, could lead to

operate. When reverse gear is

uncharacteristic changes in the

selected no acoustic signal will

vehicle handling. In the event of

sound, indicating deactivation.

such an impact, consult a

The function is reactivated by

workshop.

pressing and holding

for approx.

3 seconds.

It is possible to deactivate or

Rear view camera

temporarily deactivate the system.

Fault

The rear view camera assists the

driver when reversing by displaying a

Temporary deactivation

If the system detects an operating

view of the area behind the vehicle in

Temporarily deactivate the system by

fault, a continuous acoustic alarm will

either the interior mirror, the driver's

pressing

on the instrument panel

sound for approx. 3 seconds when

sun visor or the Infotainment system

with the ignition on. Control indicator

selecting reverse gear. Consult a

display screen.

in the button illuminates.

workshop to have the cause of the

fault remedied.

When reverse gear is selected no

9 Warning

acoustic signal will sound, indicating

deactivation.

The rear view camera does not

The function is reactivated by

replace driver vision. Note that

pressing

again or the next time

objects that are outside the

the ignition is switched on.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

148

Driving and operating

Notice

Sun visor display screen

camera's field of view, e.g. below

To achieve the optimum visibility, the

the bumper or underneath the

rear view camera must not be

vehicle, are not displayed.

obscured by dirt, snow or ice.

Do not reverse the vehicle by only

looking at the display and check

Activation

the surrounding area behind and

Interior mirror display screen

around the vehicle before

reversing.

The system can be activated or

deactivated by selecting the

Start/Stop button located on the right-

hand side of the display screen.

The remaining buttons beside the

screen enable the user to select

Rear view camera display is

source AV1 or AV2 and adjust the

automatically activated when reverse

brightness and contrast of the display

The camera is typically installed on

gear is engaged. An audible signal

screen.

the rear doors/tailgate, beneath the

confirms activation.

number plate moulding.

The area displayed by the camera is

limited. The distance of the image that

appears on the display differs from

the actual distance.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating

149

Infotainment system display screen

Trajectory lane display image (1)

The guide line intervals are as

follows:

3 (red)

30 cm

4 (yellow) : 70 cm

5 (green)

150 cm

Settings

Settings, e.g. brightness, can be set

via the Infotainment system. Refer to

Infotainment system manual for

further information.

Deactivation

The camera is deactivated after a

In vehicles with Navigation system,

Depending on version, the trajectory

delay if reverse gear is not engaged.

the rear view camera display is shown

lane (1) of the vehicle is shown in blue

on the Infotainment system display

on the Info-Display. It shows the path

Fault

screen.

of the vehicle in accordance with the

The rear view camera may not

steering angle.

operate properly when:

Fixed lane display image (2)

● the surrounding is dark

The fixed lane display (2) shows the

● the sun or the beam of headlights

path of the vehicle if the wheels are

is shining directly into the camera

kept straight.

lens

Guide lines (3, 4, 5) are used together

● ice, snow, mud, or anything else

with the fixed lane display (2) and

covers the camera lens. Clean

indicate the distance behind the

the lens, rinse it with water, and

vehicle.

wipe it with a soft cloth

-------------------------------------------------------------------------------------------------------------------------------------------------------------

150

Driving and operating

● the rear doors/tailgate are not

Activation

closed correctly

● the vehicle had a rear-end

accident

● there are extreme temperature

changes

Lane departure warning

The lane departure warning system

uses a front camera to observe the

lane markings between which the

vehicle is driving. The system detects

When control indicator ì 3 88

lane changes and warns the driver in

illuminates in the instrument cluster,

the event of an unintended lane

The lane departure warning system is

the system is ready to operate. A

change via visual and acoustic

activated by pressing ì in the roof

corresponding message also

signals.

console; LED in the button

appears in the Driver Information

extinguishes to indicate that the

Criteria for the detection of an

Centre (DIC) 3 92.

system is switched on.

unintended lane change are:

Control indicator ì extinguishes

● no operation of turn and lane-

when the system is not ready to warn

change signals

the driver.

● no active steering

The system is only operable at

vehicle speeds above approx.

If the driver is performing these

37 mph and if lane markings are

actions, no warning will be issued.

available and detected.

If the turn and lane-change signals

are not operated when changing

lanes, i.e. an unintended lane change

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating

151

is detected, control indicator ì

Driver Information Centre (DIC) 3 92.

Fuel

flashes together with a warning chime

to alert the driver.

Fuel for diesel engines

Deactivation

Only use diesel fuel that complies

with EN 590. The fuel must have low

The system is deactivated by

sulphur content (max. 10 ppm).

pressing ì; LED in the button

Equivalent standardised fuels with a

illuminates. A corresponding

biodiesel (= FAME according to

message also appears in the DIC.

EN14214) content of max. 7% by

At speeds below approx. 37 mph the

volume (like DIN 51628 or equivalent

system is inoperable.

standards) may be used.

In countries outside the European

Operation hints

Union use Euro-Diesel fuel with a

The lane departure warning system

sulphur concentration below 50 ppm.

may not operate properly when:

● The windscreen is not clean.

Caution

● There are adverse environmental

Use of fuel that does not comply to

conditions like heavy rain, snow,

EN 590 or similar can lead to

direct sunlight or shadows.

engine powerloss, increased wear

The system cannot operate when no

or engine damage and may affect

lane marking is detected.

your warranty.

Fault

Do not use marine diesel oils, heating

In the event of a fault in the system, a

oils or entirely plant-based diesel

warning message appears in the DIC

fuels, such as rape seed oil or bio

and the LED in the button illuminates.

Seek the assistance of a workshop.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

152

Driving and operating

diesel, Aquazole and similar diesel-

9 Danger

water emulsions. Diesel fuels must

not be diluted with fuels for petrol

Fuel is flammable and explosive.

Vehicles with stop-start system:

engines.

No smoking. No naked flames or

The engine must be switched off

The flow and filterability of diesel fuels

sparks.

and the ignition key removed, to

are temperature-dependent. When

avoid risk of engine being

If you can smell fuel in your

temperatures are low, refuel with

restarted automatically by the

vehicle, have the cause of this

diesel fuel with guaranteed winter

system.

remedied immediately by a

properties.

workshop.

Diesel fuel filter 3 165, diesel fuel

Capacities 3 224.

system bleeding 3 166.

Caution

Refuelling

In case of misfuelling, do not

switch on ignition.

9 Danger

The fuel tank filler neck with bayonet

Before refuelling, switch off engine

cap is located on the left front side of

and any external heaters with

the vehicle.

combustion chambers. Switch off

The fuel filler flap can only be opened

any mobile phones.

if the vehicle is unlocked and the door

Follow the operating and safety

is opened. Open the fuel filler flap by

instructions of the filling station

hand.

when refuelling.

Remove the fuel filler cap by turning

it anti-clockwise.

The fuel filler cap can be hung on the

lower hook of the fuel filler flap.

For refuelling, fully insert the pump

nozzle and switch it on.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating

153

After automatic cut-off, it can be

General information

Trailer hitch

topped up by operating the pump

The official fuel consumption and

nozzle a maximum of two more times.

specific CO₂ emission figures quoted

General information

relate to the EU base model with

Only use towing equipment that has

Caution

standard equipment.

been approved for your vehicle.

Entrust fitting of towing equipment at

Wipe off any overflowing fuel

Fuel consumption data and CO₂

a later date to a workshop. It may be

immediately.

emission data are determined

necessary to make changes that

according to regulation

affect the cooling system, heat

When refuelling is complete, replace

715/2007 692/2008 A, taking into

shields or other equipment.

the fuel filler cap and turn it clockwise.

consideration the vehicle weight in

Close the fuel filler flap.

running order, as specified by the

regulation.

Driving characteristics and

Fuel filler cap

The figures must not be taken as a

towing tips

Only use genuine fuel filler caps.

guarantee for the actual fuel

In the case of trailers with brakes,

Diesel-engined vehicles have special

consumption of a particular vehicle.

attach the breakaway stopping cable.

fuel filler caps.

Additional equipment may result in

Before attaching a trailer, lubricate

slightly higher results than the stated

the coupling ball. However, do not do

consumption and CO₂ figures.

Fuel consumption - CO₂-

so if a stabiliser, which acts on the

Furthermore, fuel consumption is

coupling ball, is being used to reduce

Emissions

dependent on personal driving style

snaking movements. For trailers with

as well as road and traffic conditions.

For the values specific to your

low driving stability the use of a

vehicle, refer to the EEC Certificate of

stabiliser is recommended.

Conformity provided with your vehicle

A maximum speed of 50 mph must

or other national registration

not be exceeded, even in countries

documents.

where higher speeds are permitted.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

154

Driving and operating

If the trailer starts snaking, drive more

level. Since engine power decreases

In the case of trailer loads of

slowly, do not attempt to correct the

as altitude increases due to the air

1200 kg or more, the vertical coupling

steering and brake sharply if

becoming thinner, therefore reducing

load should not be less than 50 kg.

necessary.

climbing ability, the permissible gross

train weight also decreases by 10%

Rear axle load

When driving downhill, drive in the

for every 1000 metres of additional

same gear as if driving uphill and

When the trailer is coupled and the

altitude. The gross train weight does

drive at a similar speed.

towing vehicle fully loaded (including

not have to be reduced when driving

Adjust tyre pressure to the value

all occupants), the permissible rear

on roads with slight inclines (less than

specified for full load 3 225.

axle load (see identification plate or

8%, e.g. motorways).

vehicle documents) must not be

The permissible gross train weight

exceeded.

Trailer towing

must not be exceeded. This weight is

specified on the identification plate

Trailer loads

Towing equipment

3 204.

The permissible trailer loads are

Vertical coupling load

Caution

vehicle-dependent and engine-

dependent maximum values which

The vertical coupling load is the load

When operating without a trailer,

must not be exceeded. The actual

exerted by the trailer on the coupling

remove the coupling ball bar.

trailer load is the difference between

ball. It can be varied by changing the

the actual gross weight of the trailer

weight distribution when loading the

Towing equipment audible

and the actual coupling socket load

trailer.

warning

with the trailer coupled.

The maximum permissible vertical

The permissible trailer loads are

coupling load is specified on the

For vehicles fitted with towing

specified in the vehicle documents. In

towing equipment identification plate

equipment, when connected to a

general, they are valid for gradients

and in the vehicle documents. Always

trailer the pitch of the audible warning

up to max. 12%.

aim for the maximum load, especially

changes upon operation of the turn

The permitted trailer load applies up

in the case of heavy trailers. The

signals.

to the specified incline and up to an

vertical coupling load should never

altitude of 1000 metres above sea

fall below 25 kg.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating

155

The pitch of the audible warning will

● Press switch on the instrument

Auxiliary features

change if a turn signal light on the

panel; LED in switch illuminates

trailer or the towing vehicle fails.

after approx. 2 seconds.

Power take-off

● Release the clutch pedal.

Trailer stability assist

The engine idle speed increases to

If the system detects snaking

1,200 rpm.

movements, engine power is reduced

and the vehicle/trailer combination is

Caution

selectively braked until the snaking

ceases. While the system is working,

During operation of the power

keep steering wheel as still as

take-off, never move the selector

possible.

lever out of neutral (vehicles with

manual transmission automated:

Trailer stability assist (TSA) is a

selector lever in position N), to

function of the Electronic Stability

avoid damage to the transmission.

Program (ESP) 3 141.

If a gear change becomes

Activation

necessary, i.e. to adjust the driving

speed, the power take-off must

To activate the power take-off, with

always be deactivated first.

the vehicle stationary and the engine

idling:

Deactivation

● Set the gearshift lever to neutral

(vehicles with manual

To deactivate the power take-off:

transmission automated:

● Depress the clutch pedal.

selector lever in position N).

● Press switch on the instrument

● Depress the clutch pedal.

panel; LED in switch

extinguishes after approx.

2 seconds.

● Release the clutch pedal.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

156

Driving and operating

Fault

If the LED in the switch does not

illuminate when attempting to activate

the power take-off and/or the system

does not operate:

Gradually release the clutch pedal.

- or -

● Set the gearshift lever to neutral

(vehicles with manual

transmission automated:

selector lever in position N).

● Depress the clutch pedal.

● Press switch on the instrument

panel; LED in switch illuminates

after approx. 2 seconds.

● Release the clutch pedal.

Then repeat the above procedure.

Notice

The power take-off function is not

available when control indicator A

3 87, C 3 88 or W 3 89 is

illuminated.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Vehicle care

157

Centre high-mounted brake

Towing

195

Vehicle care

light

172

Towing the vehicle

195

Number plate light

173

Towing another vehicle

196

Interior lights

173

Appearance care

197

Instrument panel illumination ... 174

General Information

158

Exterior care

197

Accessories and vehicle

Electrical system

174

Interior care

198

modifications

158

Fuses

174

Vehicle storage

158

Engine compartment fuse box . 176

End-of-life vehicle recovery

159

Instrument panel fuse box

176

Load compartment fuse box

177

Vehicle checks

159

Performing work

159

Vehicle tools

179

Bonnet

159

Tools

179

Engine oil

160

Wheels and tyres

180

Engine coolant

161

Tyres

180

Power steering fluid

162

Winter tyres

180

Washer fluid

163

Tyre designations

180

Brakes

163

Tyre pressure

181

Brake fluid

163

Tyre pressure monitoring

Vehicle battery

163

system

182

Diesel fuel filter

165

Tread depth

184

Diesel fuel system bleeding

166

Changing tyre and wheel size . 184

Wiper blade replacement

166

Wheel covers

184

Bulb replacement

167

Tyre chains

185

Headlights

167

Tyre repair kit

185

Adaptive forward lighting

169

Wheel changing

188

Fog lights

169

Spare wheel

190

Front turn signal lights

170

Jump starting

193

Tail lights

170

Side turn signal lights

171

Vauxhall Movano (2016 year). Manual - part 9