Vauxhall Astra (2016 year). Manual - part 13

 

  Index      Vauxhall     Vauxhall Astra (2016 year) - manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     11      12      13      14     ..

 

 

Vauxhall Astra (2016 year). Manual - part 13

 

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
207
Deactivation by the driver or by the
Basic notes on parking assist
correct distance indication in the
system during manoeuvring will be
systems
upper part of these vehicles
indicated by Parking Deactivated in
cannot be guaranteed.
the Driver Information Centre.
9 Warning
Objects with a very small reflection
Fault
cross-section, e.g. objects of
Under certain circumstances,
narrow size or soft materials, may
A message appears in the Driver
various reflective surfaces on
not be detected by the system.
Information Centre when:
objects or clothing as well as
Parking assist systems do not
external noise sources may cause
● There is a fault in the system.
detect objects outside the
the system to fail to detect
● The driver did not successfully
detection range.
obstacles.
complete the parking
Special attention must be paid to
manoeuvre.
Notice
low obstacles which can damage
The parking assist system can be
● The system is not operational.
the lower part of the bumper.
activated and deactivated by
If an object is detected during parking
changing the settings in the
instructions, Stop is indicated in the
Info-Display. If a trailer coupling is
Driver Information Centre. Removing
Caution
attached, it must be selected in the
the object will resume the parking
menu.
manoeuvre. If the object is not
Performance of the system can be
reduced when sensors are
Vehicle personalisation 3 132.
removed, the system will be
deactivated. Press
D
for approx.
covered, e.g. by ice or snow.
one second to activate the system
Performance of the parking assist
and search for a new parking slot.
system can be reduced due to
heavy loading.
Special conditions apply if there
are taller vehicles in the vicinity
(e.g. off-road vehicles, mini vans,
vans). Object identification and

-------------------------------------------------------------------------------------------------------------------------------------------------------------

208
Driving and operating
Notice
Notice
● vehicles outside the side blind
The parking assist system
After use the advanced parking
zones which may be rapidly
automatically detects factory-fitted
assist requires a calibration. For
approaching
towing equipment. It is deactivated
optimal parking guidance, a driving
● pedestrians, cyclists or animals
when the connector is plugged in.
distance of at least 22 miles,
including a number of bends, is
Before changing a lane, always
It is possible that the sensor detects
required.
check all mirrors, look over the
a non-existing object (echo
shoulder and use the turn signal.
disturbance) caused by external
Side blind spot alert
acoustical or mechanic
The Side blind spot alert system
When the system detects a vehicle in
disturbances.
detects and reports objects on either
the side blind zone while driving
Advanced parking assist system
side of the vehicle, within a specified
forward, either while passing a
may not respond to changes in the
"blind spot" zone. The system alerts
vehicle or being passed, an amber
parking space after initiating a
visually in each exterior mirror, when
warning symbol B will illuminate in
parallel parking manoeuvre.
detecting objects that may not be
the relevant exterior mirror. If the
Notice
visible in the interior and exterior
driver then activates the turn signal,
If engaging a forward gear and
mirrors.
the warning symbol B starts flashing
exceeding a certain speed, the rear
amber as a warning not to change
The system's sensors are located in
parking assist will be deactivated
lanes.
the bumper on the left and right side
when the rear carrier system is
of the vehicle.
Notice
extended.
If the passing vehicle is at least
If engaging reverse at first, the
9 Warning
6 mph faster than the passed
parking assist will detect the rear
vehicle, the warning symbol B in the
carrier system and provide a buzzing
Side blind spot alert does not
relevant exterior mirror may not
sound. Press
r
or
D
briefly to
replace driver vision.
illuminate.
deactivate the parking assist.
The system does not detect:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

209
Driving and operating
The system can be activated or
Side blind spot alert does not operate
deactivated in the menu Settings in
when the left or right corners of the
the Info-Display, vehicle
rear bumper are covered with mud,
personalisation 3 132.
dirt, snow, ice or slush. Cleaning
instructions 3 285.
Deactivation is indicated by a
message in the Driver Information
In the event of a fault in the system or
Centre.
if the system does not work due to
temporary conditions, a message is
Detection zones
displayed in the Driver Information
Centre. Seek the assistance of a
The system sensor covers a zone of
workshop in case of a permanent
approx. three metres on both sides of
fault.
the vehicle. This zone starts at each
Side blind spot alert is active from
exterior mirror and extends rearwards
speeds of 6 mph up to 87 mph.
by approx. three metres. The height
Rear view camera
Driving faster than 87 mph
of the zone is approx. between
The rear view camera assists the
deactivates the system, indicated by
0.5 metres and two metres off the
driver when reversing by displaying a
low lighting warning symbols B in
ground.
view of the area behind the vehicle.
both exterior mirrors. Reducing the
The system is deactivated if the
The view of the camera is displayed
speed again will extinguish the
vehicle is towing a trailer.
in the Colour-Info-Display.
warning symbols. If a vehicle is then
Side blind spot alert is designed to
detected in the blind zone, the
ignore stationary objects such as
warning symbols B will illuminate as
9 Warning
guardrails, posts, curbs, walls and
normal on the relevant side.
beams. Parked vehicles or oncoming
The rear view camera does not
When the vehicle is started, both
vehicles are not detected.
replace driver vision. Note that
exterior mirror displays will briefly
objects that are outside the
come on to indicate that the system is
Fault
camera's field of view and the
operating.
Occasional missed alerts can occur
advanced parking assist sensors,
under normal circumstances.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

210
Driving and operating
The camera is mounted in the tailgate
e.g. below the bumper or
handle and has a viewing angle of
underneath the vehicle, are not
130°.
displayed.
Do not reverse the vehicle by only
looking at the Info-Display and
check the surrounding area
behind and around the vehicle
before reversing.
Activation
Rear view camera is automatically
activated when reverse gear is
Trajectory lane of the vehicle is
engaged.
shown in accordance with the
steering angle.
Functionality
Due to the high position of the camera
The function can be deactivated in the
the rear bumper can be seen on the
Settings menu in the Info-Display.
display as a guide to position.
Vehicle personalisation 3 132.
The area displayed by the camera is
Warning symbols
limited. The distance of the image that
Warning symbols are indicated as
appears on the display differs from
triangles 9 on the picture which show
the actual distance.
obstacles detected by the rear
sensors of the advanced parking
Guiding lines
assist.
Dynamic guiding lines are horizontal
lines in one metre intervals projected
on the picture to define the distance
to shown objects.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
211
Display settings
Activation or deactivation of the rear
Traffic sign assistant
view camera can be changed in the
Settings menu in the Info-Display.
Functionality
Vehicle personalisation 3 132.
The traffic sign assistant system
Fault
detects designated traffic signs via a
front camera and displays them in the
Fault messages are displayed with a
Driver Information Centre.
9 on the top line of the Info-Display.
The rear view camera may not
operate properly when:
The surrounding is dark.
The sun or the beam of
headlights is shining directly into
Navi 650/Navi 950: Brightness can be
the camera lens.
set by first pressing and then turning
Ice, snow, mud, or anything else
the outer ring of the multifunction
covers the camera lens. Clean
knob.
the lens, rinse it with water, and
CD 600: Brightness can be set by first
wipe it with a soft cloth.
pressing and then turning the
The tailgate is not closed
multifunction knob.
correctly.
Traffic signs which will be detected
are:
Deactivation
The vehicle had a rear end
accident.
Limit and no passing signs
The camera is deactivated when a
● speed limit
There are extreme temperature
certain forward speed is exceeded or
changes.
● no passing
if reverse gear is not engaged for
approx. ten seconds.
● end of speed limit
● end of no passing

-------------------------------------------------------------------------------------------------------------------------------------------------------------

212
Driving and operating
Road signs
An exclamation mark in a frame
Beginning and end of:
indicates that there is an add-on sign
detected which cannot be recognised
● motorways
by the system.
● A-roads
The system is active up to a speed of
● play streets
124 mph depending on the lighting
Add-on signs
conditions. At night the system is
● additional hints to traffic signs
active up to a speed of 99 mph.
● restriction of trailer towing
As soon as vehicle speed becomes
slower than 34 mph the display will be
● tractor constraints
reset and the content of the traffic sign
● wet warning
page will be cleared. The next
● ice warning
Indication of multiple signs on the
recognized speed indication will be
● direction arrows
display is possible.
displayed.
Speed limit signs are displayed in the
Display indication
Driver Information Centre until the
next speed limit sign or end of speed
Traffic signs are displayed on the
limit is detected or up to a defined sign
Traffic sign detection page in the
timeout.
Driver Information Centre.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
213
Alert function
Select Settings
X
by pressing
The alert function can be activated or
MENU and select Traffic sign
deactivated in the Settings menu of
Once activated, speed limit and no
detection via the adjuster wheel on
the traffic sign assistant page by
passing signs are displayed as pop-
the turn signal lever 3 120.
pressing SET/CLR on the turn signal
up alerts in the Driver Information
lever.
When another page on the Driver
Centre.
Information Centre menu was
selected and then Traffic sign
detection page is chosen again, the
last recognised traffic sign will be
displayed.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

214
Driving and operating
When the Settings page is displayed,
case No Traffic Sign Detection
select Off to deactivate alert function.
due to Weather is indicated in the
Reactivate by selecting On.
Driver Information Centre.
When switching on the ignition, alert
● Traffic signs are incorrectly
function is deactivated.
mounted or damaged.
Pop-up indication is displayed for
● Traffic signs do not comply with
approx. eight seconds in the Driver
the Vienna Convention on traffic
Information Centre.
signs (Wiener Übereinkommen
über Straßenverkehrszeichen).
System reset
Caution
The content of the traffic sign memory
can be cleared in the Settings menu
In some cases, traffic sign assistant is
The system is intended to help the
of the traffic sign assistant page by
reset automatically by the system.
driver within a defined speed
pressing and holding SET/CLR on the
range to discern certain traffic
turn signal lever. Upon successful
Fault
signs. Do not ignore traffic signs
reset, a chime will sound and the
following symbol is indicated until the
The traffic sign assistant system may
which are not displayed by the
next traffic sign is detected.
not operate correctly when:
system.
● The area of the windscreen,
The system does not discern any
where the front camera is
other than the conventional traffic
located, is not clean.
signs that might give or end a
speed limit.
● Traffic signs are completely or
partially covered or difficult to
Do not let this special feature
discern.
tempt you into taking risks when
driving.
● There are adverse environmental
conditions, e.g. heavy rain, snow,
Always adapt speed to the road
direct sunlight or shadows. In this
conditions.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
215
Activation
The driver assistance systems do
not relieve the driver from full
responsibility for vehicle
operation.
Lane departure warning
The lane departure warning system
observes the lane markings between
which the vehicle is driving via a front
camera. The system detects lane
changes and warns the driver in the
event of an unintended lane change
via visual and acoustic signals.
Deactivation
Criteria for the detection of an
The lane departure warning system is
The system is deactivated by
unintended lane change are:
activated by pressing ). The
pressing ), the LED in the button
● No operation of turn signals.
illuminated LED in the button
extinguishes.
indicates that the system is switched
● No brake pedal operation.
At speeds below 35 mph the system
on. When control indicator ) in the
is inoperable.
● No active accelerator operation
instrument cluster illuminates green,
or speeding-up.
the system is ready to operate.
Fault
● No active steering.
The system is only operable at
The lane departure warning system
If the driver is active, no warning will
vehicle speeds above 35 mph and if
may not operate properly when:
be issued.
lane markings are available.
● The windscreen is not clean.
When the system recognises an
● There are adverse environmental
unintended lane change, the control
conditions like heavy rain, snow,
indicator ) changes to yellow and
direct sunlight or shadows.
flashes. Simultaneously a chime
sound is activated.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

216
Driving and operating
The system can not operate when no
Fuel
Caution
lane marking is detected.
Fuel for petrol engines
Use of fuel that does not comply to
Only use unleaded fuel that complies
EN 228 or E DIN 51626-1 or
with European standard EN 228 or
equivalent can lead to deposits or
E DIN 51626-1 or equivalent.
engine damage and may affect
your warranty.
The engine is capable of running with
fuel that contains up to 10% ethanol
(e.g. named E10).
Caution
Use fuel with the recommended
octane rating. The engine specific
Use of fuel with too low an octane
requirements are given in the engine
rating could lead to uncontrolled
data overview 3 297. A country
combustion and engine damage.
specific label at the fuel filler flap can
supersede the requirement.
Fuel for diesel engines
Only use diesel fuel that complies
Caution
with EN 590.
In countries outside the European
Do not use fuel or fuel additives
Union use Euro-Diesel fuel with a
that contain metallic compounds
sulphur concentration below 50 ppm.
such as manganese-based
additives. This may cause engine
damage.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
217
The boiling point depends on the
Pressing LPG switches between
Caution
pressure and mixing ratio. At ambient
petrol and liquid gas operation as
pressure, it is between -42 °C (pure
soon as the required parameters
Use of fuel that does not comply to
propane) and -0.5 °C (pure butane).
(coolant temperature, gas
EN 590 or similar can lead to
temperature and minimum engine
engine powerloss, increased wear
Caution
speed) have been reached. The
or engine damage and may affect
requirements are usually fulfilled after
your warranty.
The system works at an ambient
around 60 seconds (depending on
temperature of approx. -8 °C to
exterior temperature) and the first firm
Do not use marine diesel oils, heating
100 °C.
press on the accelerator. The LED
oils, Aquazole and similar diesel-
status shows the current operating
water emulsions. Diesel fuels must
Full function of the LPG system can
mode.
not be diluted with fuels for petrol
only be guaranteed with liquid gas
1 off
: petrol operation
engines.
which complies with the minimum
1 flashes
: checking conditions
requirements of DIN EN 589.
for fuel transition to
Fuel for liquid gas operation
liquid gas operation.
Fuel selector
Liquid gas is known as LPG
Illuminates if
(Liquefied Petroleum Gas) or under
conditions are fulfilled.
its French name GPL (Gaz de Pétrole
1 illumi-
: liquid gas operation
Liquéfié). LPG is also known as
nates
Autogas.
1 flashes 5
: liquid gas tank is
times and
empty or failure in
LPG consists mainly of propane and
extin-
liquid gas system. A
butane. The octane rating is between
guishes
message is displayed
105 and 115, depending on the
in the Driver
butane proportion. LPG is stored
Information Centre.
liquid at around 5 - 10 bar pressure.
If the fuel tank is empty, the engine
will not start.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

218
Driving and operating
The selected fuel mode is stored and
Due to extreme temperatures in
9 Warning
reactivated at the next ignition cycle if
combination with the gas
conditions allow.
composition, it may take slightly
If you smell gas in the vehicle or in
longer before the system switches
As soon as the liquid gas tanks are
the immediate vicinity, switch to
from petrol to gas mode.
empty, petrol operation is
petrol mode immediately. No
automatically engaged until the
In extreme situations, the system may
smoking. No naked flames or
ignition is switched off.
also switch back to petrol mode if the
ignition sources.
minimum requirements are not
When switching automatically
fulfilled. If conditions allow, it might be
between petrol or gas operation, a
If possible, close the manual shut-off
possible to manually switch back to
brief delay of engine tractive power
valve on the multivalve. The
liquid gas operation.
may be noticeable.
multivalve is located on the liquid gas
Seek the assistance of a workshop in
tank in the load compartment,
Every six months, run the petrol tank
the event of all other faults.
underneath the rear floor cover.
down until control indicator i
illuminates, then refuel. This helps
maintain fuel quality and system
Caution
function for petrol operation.
Repairs and adjustments may only
Fill the tank completely at regular
be made by trained specialists in
intervals to prevent corrosion in the
order to maintain the safety and
tank.
warranty on the LPG system.
Faults and remedies
Liquid gas is given a particular odour
If gas mode is not possible, check the
(odorised) so that any leaks can be
following:
detected easily.
● Is there enough liquid gas
present?
● Is there enough petrol present for
Turn the thumb wheel clockwise.
starting?

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
219
If no further gas odour is perceptible
9 Danger
when the manual shut-off valve is
closed, the vehicle can be used in
Before refuelling, switch off
petrol mode. If the gas odour persists,
ignition and any external heaters
do not start the engine. Have the
with combustion chambers.
cause of the fault remedied by a
Switch off any mobile phones.
workshop.
Follow the operating and safety
When using underground car parks,
instructions of the filling station
follow the instructions of the operator
when refuelling.
and local laws.
Notice
In the event of an accident, switch off
9 Danger
the ignition and lights. Close the
The fuel filler flap can only be opened
manual shut-off valve on multivalve.
Fuel is flammable and explosive.
if the vehicle is unlocked. Release the
No smoking. No naked flames or
fuel filler flap by pushing the flap.
Refuelling
sparks.
To open, turn the cap slowly to the
If you can smell fuel in your
left.
vehicle, have the cause of this
remedied immediately by a
workshop.
Caution
In case of misfuelling, do not
switch on ignition.
Fuel filler flap is located at right rear
side of the vehicle.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

220
Driving and operating
The fuel filler cap can be retained in
the bracket on the fuel filler flap.
To refuel, fully insert the pump nozzle
and switch it on.
After automatic cut-off, it can be
topped up by operating the pump
nozzle maximally two more times.
Caution
Wipe off any overflowing fuel
immediately.
Unscrew protective cap from the filler
ACME Adapter: Screw the nut of the
To close, turn the fuel filler cap to the
neck.
filling nozzle onto the adapter. Press
right until it clicks.
locking lever on filler nozzle down.
Close the flap and engage.
DISH filler neck: Place the filler nozzle
into the adapter. Press locking lever
Liquid gas refuelling
on filler nozzle down.
Follow the operating and safety
Bayonet filler neck: Place filler nozzle
instructions of the filling station when
on the adapter and turn to the left or
refuelling.
right through one quarter turn. Pull
locking lever of filler nozzle fully.
The filling valve for the liquid gas is
behind the fuel filler cap.
EURO filler neck: Press the filler
nozzle onto the adapter until it
engages.
Screw the required adapter hand-
tight onto the filler neck.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
221
Press the button of the liquid gas
The multivalve on the liquid gas tank
supply point. The filling system stops
automatically limits the fill quantity. If
or begins to run slowly when 80% of
a larger quantity is added, we
the tank volume is reached
recommend not exposing the vehicle
(maximum fill level).
to the sun until the excess amount
has been used up.
Release button on filling system to
stop the filling process. Release the
Filling adapter
locking lever and remove the filler
As filling systems are not
nozzle. A small quantity of liquid gas
standardised, different adapters are
can escape.
required which are available from
Remove adapter and stow in vehicle.
Vauxhall Distributors and from
Fit protective cap to prevent the
Vauxhall Authorised Repairers.
Bayonet adapter: Netherlands,
penetration of foreign bodies into the
Norway, Spain, United Kingdom
filler opening and the system.
9 Warning
Due to the system design, an
escape of liquid gas after
releasing the locking lever is
unavoidable. Avoid inhaling.
9 Warning
The liquid gas tank may only be
ACME adapter: Belgium, Germany,
filled to 80% for safety reasons.
Ireland, Luxembourg, Switzerland
EURO adapter: Spain

-------------------------------------------------------------------------------------------------------------------------------------------------------------

222
Driving and operating
The figures are provided only for the
Fuel consumption - CO2-
purpose of comparison between
Emissions
different vehicle variants and must
The fuel consumption (combined) of
not be taken as a guarantee for the
the model Vauxhall Astra is within a
actual fuel consumption of a
range of 36 to 78 mpg.
particular vehicle. Additional
equipment may result in slightly
The CO2 emission (combined) is
higher results than the stated
within a range of 184 to 94 g/km.
consumption and CO2 figures.
For the values specific to your
Furthermore, fuel consumption is
vehicle, refer to the EEC Certificate of
dependent on personal driving style
Conformity provided with your vehicle
as well as road and traffic conditions.
or other national registration
DISH adapter: Bosnia-Herzegovina,
documents.
Bulgaria, Denmark, Estonia, France,
Greece, Italy, Croatia, Latvia,
General information
Lithuania, Macedonia, Austria,
The official fuel consumption and
Poland, Portugal, Romania, Sweden,
specific CO2 emission figures quoted
Switzerland, Serbia, Slovakia,
Slovenia, Czech Republic, Turkey,
relate to the EU base model with
Ukraine, Hungary
standard equipment.
Fuel consumption data and CO2
Fuel filler cap
emission data are determined
Only use genuine fuel filler caps.
according to regulation
Diesel-engined vehicles have special
R (EC) No. 715/2007 (in the latest
fuel filler caps.
applicable version), taking into
consideration the vehicle weight in
running order, as specified by the
regulation.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
223
Trailer hitch
Driving characteristics and
Trailer towing
towing tips
Trailer loads
General information
Before attaching a trailer, lubricate
Only use towing equipment that has
the coupling ball. However, do not do
The permissible trailer loads are
been approved for your vehicle.
so if a stabiliser, which acts on the
vehicle and engine-dependent
Entrust retrofitting of towing
coupling ball, is being used to reduce
maximum values which must not be
equipment to a workshop. It may be
snaking movements.
exceeded. The actual trailer load is
necessary to make changes that
the difference between the actual
For trailers with low driving stability
affect the cooling system, heat
gross weight of the trailer and the
and caravan trailers with a permitted
shields or other equipment.
actual coupling socket load with the
gross vehicle weight of more than
trailer coupled.
The bulb outage detection function for
1300 kg (Sports tourer: 1200 kg) the
trailer brake light cannot detect a
use of a stabiliser is strongly
The permissible trailer loads are
partial bulb outage, e.g. in case of 4 x
recommended when driving above
specified in the vehicle documents. In
5 Watt bulbs, the function only detects
50 mph.
general, they are valid for gradients
lamp outage when only a single
up to max. 12%.
If the trailer starts snaking, drive more
5 Watt lamp remains or none remain.
The permitted trailer load applies up
slowly, do not attempt to correct the
Fitting of towing equipment could
steering and brake sharply if
to the specified incline and up to an
cover the opening of the towing eye.
necessary.
altitude of 1000 metres above sea
If this is the case use the coupling ball
level. Since engine power decreases
When driving downhill, drive in the
bar for towing. Always keep the
as altitude increases due to the air
same gear as if driving uphill and
coupling ball bar in the vehicle.
becoming thinner, therefore reducing
drive at a similar speed.
climbing ability, the permissible gross
Adjust tyre pressure to the value
train weight also decreases by 10%
specified for full load 3 308.
for every 1000 metres of additional
altitude. The gross train weight does
not have to be reduced when driving
on roads with slight inclines (less than
8%, e.g. motorways).

 

 

 

 

 

 

 

Content      ..     11      12      13      14     ..