Porshe 911 (997). Manual - part 571

- Preliminary work
- Disassembling rear spoiler
- Assembling rear spoiler
- Subsequent work

Preliminary work

Preliminary work

1. Remove rear spoiler. → 635519 Removing and installing rear spoiler - chapter on "removing" [997110

997111 997310 997311 997410 997411 997610 997611]→ 635519 Removing and installing rear spoiler -
chapter on "removing" [997120 997121 997320 997321 997430 997431 997620 997621]

Note

Only for vehicles with ParkAssist.

• 

2. Remove sensor for ParkAssist. → 917519 Removing and installing sensor for ParkAssist -

removing

3. Remove number plate light. → 942919 21 Removing and installing number plate light -

removing

4. Remove wiring harness for number plate light. → 977019 Removing and installing wiring harness for

number plate light - chapter on "removing"

Note

Only for USA/Canada version vehicles.

• 

5. Remove rear bumper horn. → 636519 Removing and installing rear bumper horn - chapter on

"removing" [997110 997120 997310 997320 997410 997430 997610 997620]→ 636519
21 Removing and installing rear bumper horn - chapter on "removing" [997111 997121
997311 997321 997411 997431 997611 997621]

Disassembling rear spoiler

2441

Removing the lower retaining strip

Installation Location:

Installation position of retaining strip

Removing the lower retaining strip

1. Bore out rivets -2- and lower retaining strip

-1-

 .

Removing cover cap

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing the lower retaining strip

2442

Installation position of cover cap

Removing cover cap

1. Carefully press out the cover cap -2- with a screwdriver. The securing cord -3- the cover cap -2- and the

rear end -1- are joined as they pull out.

Assembling rear spoiler

Installing cover cap

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing cover cap

2443

Installation position of cover cap

Installing cover cap

1. Pull the securing cord -3- into the eyelet of the rear apron -1- . Insert cap -2- into the rear apron -1- .

Installing the lower retaining strip

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Installing cover cap

2444