Porshe 911 (997). Manual - part 495

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  493  494  495  496   ..

 

 

Porshe 911 (997). Manual - part 495

 

 

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Adjusting the hardtop

2137

61 02 19 Removing and installing hardtop - as of MY
2005

- Removing hardtop
- Installing hardtop

Removing hardtop

Removing hardtop

Installation Location:

Main illustration, removing and installing hardtop

1. Open all four side windows.

Pulling off cover for locking lever

2138

2. Pull cover of the front locking lever -1- down and off.

Opening the locking lever

3. Press red knob -2- on the front locking lever -1- and open the catch fully.

Removing the plastic cover

4. Take unlocking handle -1- from the shelf between the two front seats. Carefully remove the plastic cover

-2-

 on both sides of the hardtop using the unlocking handle -1- .

Unlock hardtop lock

5. Insert unlocking handle -1- into one of the rear hardtop locking elements. Loosen fastening screw -2-

approx. 2 turns, pull off handle and completely loosen fastening screw -2- by hand (approx. 8 turns).

6. Unscrew fastening screw -2- up until stop and turn 2 turns to the left (safeguard it against

damage).

7. Repeat procedure on the other side of the hardtop.

Diagnostic system: reading out fault memory and activating systems

Removing hardtop

2139

Removing the hardtop

ATTENTION

Hand can be trapped between the hardtop and convertible top compartment lid.

→ Evenly lift the hardtop at both sides.

8. Together with another person on the other side, evenly lift the hardtop -1- out of the locking

elements. Carefully lift the hardtop up and over the vehicle to the rear. Carefully take the protective
cover out of the roll-over protection cover to the rear and press the plastic cover into the locking
elements.

Pressing in covers

9. Press both plastic covers -2- in the rear cover -1- .

Installing hardtop

Installing hardtop

Installation Location:

Diagnostic system: reading out fault memory and activating systems

 Installing hardtop

2140

 

 

 

 

 

 

 

Content   ..  493  494  495  496   ..