|
|
Section 02 TROUBLESHOOTING Subsection 04 (ELECTRICAL SYSTEM) SYMPTOM STARTER TURNS, BUT OVERRUNNING CLUTCH PINION DOES NOT MESH WITH RING GEAR. CONDITION NORMAL USE 1. Check clutch pinion gear. a. Worn clutch pinion gear. Replace clutch. 2. Check clutch. a. Defective clutch. Replace clutch. 3. Check brackets. a. Worn or broken brackets. Replace brackets. 4. Check movement of clutch on splines. a. Poor movement of clutch on splines. Clean and correct. 5. Check clutch bushing. a. Worn clutch bushing. Replace clutch. 6. Check starter bushings. a. Worn starter bushing(s). Replace bushing(s). 7. Check ring gear. a. Worn ring gear. Replace ring gear. TEST/INSPECTION 8. Check for proper starter rotation direction. a. Starter turns in wrong direction, incorrectly installed brushes, wrong polarity or wrong starter. Replace starter or reconnect properly. MMR2005-066 35 |