HUAWEI OptiX OSN 8800 T64/T32 Intelligent Optical Transport Platform. Product Description - part 67
Board
Power
Power
Power
Power
Weigh
Numb
Valid
Valid
Consu
Consu
Consu
Consu
t (kg/
er of
Slots
Slots
mptio
mptio
mptio
mptio
lb.)
Occup
of 8800
of 8800
n at 25°
n at 55°
n at
n at
ied
T32
T64
C (77°
C (131°
Warm
Warm
Slots
F) (W)
F) (W)
Backu
Backu
p (25°
p (55°
C, 77°
C, 131°
F) (W)
F) (W)
TNK4S
321-
353-
112
123
2.68
1+1
-
TNK4S
XH
2.5 x
2.5 x
(5.9)
XH :
+TNK2
(64-n)
(64-n)
+3.6
IU10,
XCT
(7.9)
IU44
TNK2
XCT :
IU9,
IU43
TNK4S
188-
207-
97
107
3.0(6.6)
1+1
-
TNK4S
XM
1.2 x
1.32 x
+2.9
XM :
+TNK4
(64-n)
(64-n)
(6.3)
IU10,
XCT
IU44
TNK4
XCT :
IU9,
IU43
TNK4S
169-
186-
95
105
2.68
1+1
-
TNK4S
XH
1.2 x
1.32 x
(5.9)
XH :
+TNK4
(64-n)
(64-n)
+2.9
IU10,
XCT
(6.3)
IU44
TNK4
XCT :
IU9,
IU43
TN52X
243 -
267.3 -
65
72
3.4/7.5
1
IU9,
-
CH01
3.6 x
3.6 x
IU10
(32 - n)
(32 - n)
TN52X
101 -
111 -
43
47.3
3.4/7.5
1
IU9,
-
CH02
1.12 x
1.12 x
IU10
(32 - n)
(32 - n)
TN52X
339 -
368 -
125
138
3.8/8.4
1
IU9,
-
CM01
3.6 x
3.6 x
IU10
(32 - n)
(32 - n)
-80 x m
-80 x m
719
Board
Power
Power
Power
Power
Weigh
Numb
Valid
Valid
Consu
Consu
Consu
Consu
t (kg/
er of
Slots
Slots
mptio
mptio
mptio
mptio
lb.)
Occup
of 8800
of 8800
n at 25°
n at 55°
n at
n at
ied
T32
T64
C (77°
C (131°
Warm
Warm
Slots
F) (W)
F) (W)
Backu
Backu
p (25°
p (55°
C, 77°
C, 131°
F) (W)
F) (W)
TN52X
124 -
136.4 -
67
73.7
3.8/8.4
1
IU9,
-
CM02
1.12 x
1.12 x
IU10
(32 - n)
(32 - n)
-23 x m
-23 x m
NOTE
When the OptiX OSN 8800 T64 subrack grooms electrical-layer signals through the backplane, the XCT
must be configured with SXM or SXH.
"n" is equal to the total number of tributary, line, and PID boards housed in a subrack.
l If a subrack is configured with VC-3 or VC-12 cross-connections, "m" is equal to 0.
l If a subrack is not configured with any VC-3 or VC-12 cross-connections, "m" is equal to 1.
720
C
Standards Compliance
The product complies with related standards and regulations.
C.1 ITU-T Standards
C.2 IEEE Standards
C.3 Laser Security Standards
C.4 Security Standards
C.5 EMC Standards
C.6 Environment Related Standards
C.7 Grounding Standards
C.8 Noise Standard
C.9 Fireproofing Standards
C.10 International Standards
721
C.1 ITU-T Standards
Recommendations on Architectures
Code
Name
ITU-T G.803
Architectures of transport networks based on the Synchronous
Digital Hierarchy (SDH)
ITU-T G.841
Types and characteristics of SDH network protection architectures
ITU-T G.842
Interworking of SDH network protection architectures
ITU-T G.871
Framework for optical transport network Recommendations
ITU-T G.872
Architecture of optical transport networks
Recommendations on Physical-Layer Features
Code
Name
ITU-T Rec.G.692
Optical interfaces for multichannel systems with optical amplifiers
ITU-T Rec.G.694.1
Spectral grids for WDM applications: DWDM frequency grid
ITU-T Rec.G.694.2
Spectral grids for WDM applications: CWDM frequency grid
ITU-T Rec.G.696.1
Intra-Domain DWDM applications
ITU-T Rec.G.703
Physical/electrical characteristic of hierarchical digital interfaces
ITU-T G.957
Optical interfaces of equipments and systems relating to the
synchronous digital hierarchy
ITU-T G.691
Optical interfaces for single channel STM-64 and other SDH
systems with optical amplifiers
ITU-T G.693
Optical interfaces for intra-office systems
ITU-T G.697
Optical monitoring for DWDM systems
ITU-T G.698.2
Amplified multichannel DWDM applications with single channel
optical interfaces
ITU-T G.671
Transmission characteristics of optical components and
subsystems
ITU-T G.959.1
Optical transport network physical layer interfaces
ITU-T G.661
Definition and test methods for the relevant generic parameters of
optical amplifier devices and subsystems
ITU-T G.662
Generic characteristics of optical amplifier devices and subsystems
722
Code
Name
ITU-T G.663
Application related aspects of optical amplifier devices and sub-
systems
ITU-T G.664
Optical safety procedures and requirements for optical transport
systems
ITU-T G.665
Generic Characteristics of Raman Amplifiers and Raman
Amplified Subsystems
Recommendations on Structures and Mappings
Code
Name
ITU-T G.702
Digital hierarchy bit rates
ITU-T G.704
Synchronous frame structures used at 1544,6312,2048,8448 and
44736 kbit/s hierarchical levels
ITU-T Rec.G.707
Network node interface for the synchronous digital hierarchy
(SDH)
ITU-T Rec.G.709
Interfaces for the Optical Transport Network (OTN)
ITU-T Rec.G.7041/Y.
Generic Framing Procedure (GFP)
1303
Recommendations on Equipment Functions and Features
Code
Name
ITU-T G.783
Characteristics of Synchronous Digital Hierarchy (SDH)
equipment functional blocks
ITU-T G.798
Characteristics of optical transport network hierarchy equipment
functional blocks
ITU-T G.8011
Ethernet over Transport - Ethernet services framework
ITU-T G.8011.1
Ethernet private line service
ITU-T G.8011.2
Ethernet virtual private line service
ITU-T G.813
Timing characteristics of SDH equipment slave clocks (SEC)
ITU-T G.975
Forward error correction for submarine systems
ITU-T G.975.1
Forward error correction for high bit rate DWDM submarine
systems
ITU-T Rec.G.781
Synchronization layer functions
723
Code
Name
ITU-T Rec.G.811
Timing characteristics of primary reference clocks
ITU-T Rec.Q.812
Protocol profile for electronic communications interactive agent
ITU-T Rec.M.2120
International multi-operator paths,sections and transmission
systems fault detection and localization procedures
Recommendations on Network Protection
Code
Name
ITU-T G.772
Protected monitoring points provided on digital transmission
systems
ITU-T G.8032/Y.1344
Ethernet Ring Protection Switching
ITU-T G.808.1
Generic protection switching-Linear trail and subnetwork
protection
ITU-T G.873.1
Optical Transport Network (OTN): Linear protection
Recommendations on Jitter and Performance
Code
Name
ITU-T G.823
The control of jitter and wander within digital networks which are
based on the 2048 kbit/s hierarchy
ITU-T G.824
The control of jitter and wander within digital networks which are
based on the 1544 kbit/s hierarchy
ITU-T G.825
The control of jitter and wander within digital networks which are
based on the Synchronous Digital Hierarchy (SDH)
ITU-T G.826
Error performance parameters and objectives for
international,constant bit rate digital paths at or above the primary
rate
ITU-T M.2401
Error performance limits and procedures for bringing-into-service
and maintenance of multi operator international paths and sections
within an optical transport network
ITU-T G.8201
Error performance parameters and objectives for multi-operator
international paths within the Optical Transport Network (OTN)
ITU-T G.8261/Y.1361
Timing and synchronization aspects in Packet Networks
ITU-T G.8262/Y.1362
Timing characteristics of synchronous Ethernet equipment slave
clock
724
Code
Name
ITU-T Rec.G.828
Error performance parameters and objectives for international,
constant bit rate synchronous digital paths
ITU-T Rec.G.829
Error performance events for SDH multiplex and regenerator
sections
ITU-T Rec.G.8251
The control of jitter and wander within the optical transport
network (OTN)
Recommendations on Equipment Management
Code
Name
ITU-T G.7710
Equipment Management Function (EMF) requirements that are
common to multiple transport technologies
ITU-T G.773
Protocol suites for Q-interfaces for management of transmission
systems
ITU-T Rec.G.774.1
Synchronous digital hierarchy (SDH) Bidirectional performance
monitoring for the network element view
ITU-T Rec.G.774.2
Synchronous digital hierarchy (SDH) Configuration of the payload
structure for the network element view
ITU-T Rec.G.774.3
Synchronous digital hierarchy (SDH) Management of multiplex-
section protection for the network element view
ITU-T Rec.G.774.4
Synchronous digital hierarchy (SDH) Management of the
subnetwork connection protection for the network element view
ITU-T Rec.G.774.5
Synchronous digital hierarchy (SDH) Management of connection
supervision functionality (HCS/LCS) for the network element
view
ITU-T Rec.G.775
Loss of Signal (LOS),Alarm Indication Signal (AIS) and Remote
Defect Indication (RDI) defect detection and clearance criteria for
PDH signals
ITU-T G.784
Synchronous Digital Hierarchy (SDH) management
ITU-T G.831
Management capabilities of transport networks based on the
Synchronous Digital Hierarchy (SDH)
ITU-T G.870/Y.1352
Terms and definitions for Optical Transport Networks (OTN)
ITU-T G.874
Management aspects of the optical transport network element
ITU-T G.875
Optical transport network (OTN) management information model
for the network element view
ITU-T M.3010
Principles for a telecommunication management network
725
Code
Name
ITU-T Rec.Q.811
Lower layer protocol profiles for the Q3 and X interfaces
ITU-T Rec.X.721
Information Technology - Open Systems Interconnection -
Structure of Management Information: Definition of Management
Information
C.2 IEEE Standards
Standar
Description
d
IEEE
Media Access Control (MAC) Bridges
802.1d
IEEE
Virtual bridged local area networks
802.1q
IEEE
Virtual Bridged Local Area Networks Amendment 4: Provider Bridges, QinQ
802.1ad
IEEE
Virtual Bridged Local Area Networks — Amendment 5: Connectivity Fault
802.1ag
Management
IEEE
LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization
802.1p
IEEE
Multiple Spanning Trees
802.1s
IEEE Std
Carrier sense multiple access with collision detection (CSMA/CD) access
802.3
method and physical layer specification
IEEE
Media Access Control (MAC) parameters, physical Layer, repeater and
802.3z
management parameters for 1000 Mb/s operation
IEEE
Media Access Control (MAC) parameters, physical Layer, and management
802.3ae
parameters for 10Gb/s operation
IEEE
IEEE Standard for a Precision Clock Synchronization Protocol for Networked
1588v2
Measurement and Control Systems
C.3 Laser Security Standards
Standard
Description
IEC 60825-1
Safety of laser products-Part 1: Equipment classification, requirements
and user's guide
726
Standard
Description
IEC 60825-2
Safety of laser products-Part 2: Safety of optical fiber communication
systems
C.4 Security Standards
Standard
Description
IEC 60215
Safety requirements for radio transmitting equipment
EN 60950-1
Safety of Information Technology Equipment. Including Electrical
Business Equipment
IEC 60950-1
Safety of Information Technology Equipment. Including Electrical
Business Equipment
CAN/CSA-C22.2
Safety of Information Technology Equipment Including Electrical
No 60950-1
Business Equipment
UL 60950-1
3rd edition Safety of Information Technology Equipment Including
Electrical Business Equipment
IEC Publication
Guide on the effects of current passing through the human body
479-1
IS 8437 {1993}
Guide on the effects of current passing through the human body
IS 13252 {1993}
Safety of information technology equipment including electrical
business equipment
C.5 EMC Standards
Standard
Description
IEC Publication
Testing and measurement techniques of electrostatic discharge
1000-4-2
immunity test
IEC Publication
Radiated RF electromagnetic field immunity test
1000-4-3
IEC Publication
Testing and measurement techniques of electrical fast transients/burst
1000-4-4
immunity test
IEC Publication
Immunity to conducted disturbances
1000-4-6
Information technology equipment-Radio disturbance characteristics-
EN 55022
Limits and methods of measurement
727
Standard
Description
EN 55024
Information technology equipment-Immunity characteristics-Limits
and methods of measurement
IEC 61000-4-2
Testing and measurement techniques -Electrostatic discharge
immunity test
IEC 61000-4-3
Testing and measurement techniques -Radiated, radio-frequency,
electromagnetic field immunity test
IEC 61000-4-4
Testing and measurement techniques -Electrical fast transient/burst
immunity test
IEC 61000-4-5
Testing and measurement techniques -Surge immunity test
IEC 61000-4-6
Testing and measurement techniques -Immunity to conducted
disturbances, induced by radio-frequency fields
IEC 61000-4-11
Testing and measurement techniques -Voltage dips, short
interruptions and voltage variations immunity tests
IEC 61000-4-29
Testing and measurement techniques -Voltage dips, short
interruptions
ETSI EN 300 386
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Telecommunication network equipment; Electro Magnetic
Compatibility (EMC) requirements
GR-1089-CORE
Electromagnetic compatibility and electrical safety - generic criteria
for network telecommunications equipment
C.6 Environment Related Standards
Standard
Description
ETSI EN 300
Class 1.1: weather-protected, partly temperature-controlled storage
019-1-1
locations
Class 1.2: weather-protected, not temperature-controlled storage
locations
ETSI EN 300
Class 2.2: Careful transportation
019-1-2
ETSI EN 300
Class 3.2 Partly temperature-controlled location
019-1-3:
NEBS GR-63-
Network Equipment-Building System (NEBS) Requirements:
CORE
Physical Protection
RoHS
Restriction of the use of certain hazardous substance in electrical and
electronic equipment
728
The equipment complies with ROHS standards and the materials used for each component are
listed as follows.
Table C-1 Main materials used in OptiX OSN 8800 T32
Percentage (Based on
RoHS
Part
Material
Weight (kg)
Product Weight)
Substance
Cabinet
Fe
56
28.1%
No
AL
3
1.50%
No
Cu
2
1.00%
No
ABS
3
1.50%
No
Other material
2
1.00%
No
Subrack
Fe
26.0
13.0%
No
ABS
0.3
0.15%
No
Zn
0.15
0.08%
No
Cable
Typical
7.0
3.51%
No
configuration
(power cable,
ground cable,
alarm cable,
management cable
and clock cable)
Other
1.5kg/m
-
No
configuration
(Weight for each
meter)
Fiber
Typical
30.0
15.04%
No
configuration (10-
meter fiber x 58)
Boards
Fully
70.0
35.10%
Pb (in solder)
configuration (50
boards,
components
included)
Total
Typical
199.45
100%
-
configuration
729