SINUMERIK 840D sl. Service - Configuring Commissioning. Manual (2011-2020) - page 100
List of system variables
3.18 Multitool data
$TC_MTPC58 [32000]
-
DOUBLE
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPC59 [32000]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPC59[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPC60 [32000]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPC60[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPC61 [32000]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPC61[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
541
List of system variables
3.18 Multitool data
$TC_MTPC61 [32000]
-
DOUBLE
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPC62 [32000]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPC62[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPC63 [32000]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPC63[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPC64 [32000]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPC64[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
System variables
542
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPC64 [32000]
-
DOUBLE
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPCS1 [32000]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPCS1[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPCS2 [32000]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPCS2[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPCS3 [32000]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPCS3[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
543
List of system variables
3.18 Multitool data
$TC_MTPCS3 [32000]
-
INT
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPCS4 [32000]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPCS4[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPCS5 [32000]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPCS5[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPCS6 [32000]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPCS6[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
System variables
544
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPCS6 [32000]
-
INT
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPCS7 [32000]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPCS7[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPCS8 [32000]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPCS8[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPCS9 [32000]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPCS9[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
545
List of system variables
3.18 Multitool data
$TC_MTPCS9 [32000]
-
INT
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPCS10 [32000]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPCS10[n]
Index 1:
n: Multitool number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPP2 [32000,72]
Multitool location type
INT
Description:
$TC_MTPP2[n,m]
Multitool location type
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
0
32000
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPP4 [32000,72]
Multitool location status
INT
Description:
$TC_MTPP4[n,m]
Multitool location status
Bit 0=1: Disabled
Bit 0=0: Enabled
Bit 1=1: Free to hold a tool
Bit 1=0: Occupied
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
2
0
3
System variables
546
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPP4 [32000,72]
Multitool location status
INT
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPP6 [32000,72]
T no. of the tool at this Multitool location
INT
Description:
$TC_MTPP6[n,m]
T No. of the tool on this Multitool location
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
0
32000
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPP7 [32000,72]
Adapter number of the tool adapter at this Multitool
INT
location
Description:
$TC_MTPP7[n,m]
Adapter number of the tool adapter on this Multitool location
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
0
32000
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPL [32000,72]
Distance from reference location, length
DOUBLE
Description:
$TC_MTPPL[n,m]
Distance from reference location, length
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
547
List of system variables
3.18 Multitool data
$TC_MTPPL [32000,72]
Distance from reference location, length
DOUBLE
Unit
Init value
Min
Max
mm
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPA [32000,72]
Distance from reference location, angle
DOUBLE
Description:
$TC_MTPPA[n,m]
Distance from reference location, angle
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
deg.
0.0
0.0
360.0
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC1 [32000,72]
-
DOUBLE
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPC1[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC2 [32000,72]
-
DOUBLE
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPC2[n,m]
Index 1:
n: Multitool number
System variables
548
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC2 [32000,72]
-
DOUBLE
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC3 [32000,72]
-
DOUBLE
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPC3[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC4 [32000,72]
-
DOUBLE
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPC4[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
549
List of system variables
3.18 Multitool data
$TC_MTPPC5 [32000,72]
-
DOUBLE
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPC5[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC6 [32000,72]
-
DOUBLE
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPC6[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC7 [32000,72]
-
DOUBLE
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPC7[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
550
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC8 [32000,72]
-
DOUBLE
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPC8[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC9 [32000,72]
-
DOUBLE
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPC9[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC10 [32000,72]
-
DOUBLE
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPC10[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
551
List of system variables
3.18 Multitool data
$TC_MTPPC11 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC11[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC12 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC12[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC13 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC13[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
552
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC14 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC14[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC15 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC15[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC16 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC16[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
553
List of system variables
3.18 Multitool data
$TC_MTPPC17 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC17[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC18 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC18[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC19 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC19[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
554
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC20 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC20[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC21 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC21[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC22 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC22[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
555
List of system variables
3.18 Multitool data
$TC_MTPPC23 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC23[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC24 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC24[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC25 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC25[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
556
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC26 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC26[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC27 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC27[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC28 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC28[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
557
List of system variables
3.18 Multitool data
$TC_MTPPC29 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC29[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC30 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC30[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC31 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC31[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
558
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC32 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC32[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC33 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC33[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC34 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC34[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
559
List of system variables
3.18 Multitool data
$TC_MTPPC35 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC35[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC36 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC36[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC37 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC37[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
560
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC38 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC38[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC39 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC39[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC40 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC40[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
561
List of system variables
3.18 Multitool data
$TC_MTPPC41 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC41[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC42 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC42[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC43 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC43[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
562
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC44 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC44[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC45 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC45[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC46 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC46[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
563
List of system variables
3.18 Multitool data
$TC_MTPPC47 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC47[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC48 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC48[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC49 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC49[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
564
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC50 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC50[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC51 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC51[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC52 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC52[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
565
List of system variables
3.18 Multitool data
$TC_MTPPC53 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC53[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC54 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC54[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC55 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC55[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
566
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC56 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC56[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC57 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC57[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC58 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC58[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
567
List of system variables
3.18 Multitool data
$TC_MTPPC59 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC59[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC60 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC60[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC61 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC61[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
568
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPC62 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC62[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC63 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC63[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPC64 [32000,72]
-
DOUBLE
Description:
The type can be specified by machine data. INT is the default setting
$TC_MTPPC64[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
569
List of system variables
3.18 Multitool data
$TC_MTPPCS1 [32000,72]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPCS1[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPCS2 [32000,72]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPCS2[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPCS3 [32000,72]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPCS3[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
570
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.18 Multitool data
$TC_MTPPCS4 [32000,72]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPCS4[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPCS5 [32000,72]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPCS5[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPCS6 [32000,72]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPCS6[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
571
List of system variables
3.18 Multitool data
$TC_MTPPCS7 [32000,72]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPCS7[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPCS8 [32000,72]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPCS8[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$TC_MTPPCS9 [32000,72]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPCS9[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
572
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.19 Measurement system compensation values
$TC_MTPPCS10 [32000,72]
-
INT
Description:
The type can be specified by the machine data. Default setting is INT
$TC_MTPPCS10[n,m]
Index 1:
n: Multitool number
Index 2:
m: Multitool location number
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
3.19
Measurement system compensation values
$AA_ENC_COMP [n,m]
EEC table: Compensation value
DOUBLE
Description:
$AA_ENC_COMP[n,m,a]
Compensation values
a: Machine axes
Index 1:
n: Encoder no. 0-1
Index 2:
m: Point no. 0 - <MD value>
Index 3:
Maximum number of axes in the system
Unit
Init value
Min
Max
Linear / angular position
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
MACH
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AA_ENC_COMP_STEP [n,31]
EEC table: Distance between interpolation points
DOUBLE
Description:
$AA_ENC_COMP_STEP[n,a]
Increment
a: Machine axes
Index 1:
n: Encoder no. 0-1
Index 2:
Axis index
Unit
Init value
Min
Max
Linear / angular position
0.0
-1.8E+308
1.8E+308
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
573
List of system variables
3.19 Measurement system compensation values
$AA_ENC_COMP_STEP [n,31]
EEC table: Distance between interpolation points
DOUBLE
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
MACH
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AA_ENC_COMP_MIN [n,31]
EEC table: Starting position
DOUBLE
Description:
$AA_ENC_COMP_MIN[n,a]
Start position of compensation
a: Machine axes
Index 1:
n: Encoder no. 0-1
Index 2:
Axis index
Unit
Init value
Min
Max
Linear / angular position
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
MACH
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AA_ENC_COMP_MAX [n,31]
EEC table: End position
DOUBLE
Description:
$AA_ENC_COMP_MAX[n,a]
End position of compensation
a: Machine axes
Index 1:
n: Encoder no. 0-1
Index 2:
Axis index
Unit
Init value
Min
Max
Linear / angular position
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
MACH
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
574
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.20 Interpolatory compensation
$AA_ENC_COMP_IS_MODULO [n,31]
EEC table: Modulo functionality
BOOL
Description:
$AA_ENC_COMP_IS_MODULO[n,a]
Compensation is modulo
a: Machine axes
Index 1:
n: Encoder no. 0-1
Index 2:
Axis index
Unit
Init value
Min
Max
-
FALSE
FALSE
TRUE
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
MACH
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
3.20
Interpolatory compensation
$AN_CEC [n,m]
CEC table: Compensation value
DOUBLE
Description:
$AN_CEC[n,m]
Compensation value
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Index 2:
n: No. of support point 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_INPUT_NCU [n]
CEC table: Basic axis on NCU
INT
Description:
$AN_CEC_INPUT_NCU[n]:
NCU on which the basic axis is calculated
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
0
0
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
575
List of system variables
3.20 Interpolatory compensation
$AN_CEC_INPUT_NCU [n]
CEC table: Basic axis on NCU
INT
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_INPUT_AXIS [n]
CEC table: Basic axis
AXIS
Description:
$AN_CEC_INPUT_AXIS[n]:
Name of axis whose setpoint is used as the compensation table input
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
-1
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_OUTPUT_NCU [n]
CEC table: Compensation axis on NCU
INT
Description:
$AN_CEC_OUTPUT_NCU[n]:
NCU on which the compensation axis is calculated
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
0
0
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_OUTPUT_AXIS [n]
CEC table: Compensation axis
AXIS
Description:
$AN_CEC_OUTPUT_AXIS[n]:
Name of axis to which the output of the compensation table is applied
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
-1
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
-
0
-
System variables
576
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.20 Interpolatory compensation
$AN_CEC_OUTPUT_AXIS [n]
CEC table: Compensation axis
AXIS
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_STEP [n]
CEC table: Distance between interpolation points
DOUBLE
Description:
$AN_CEC_STEP[n]
Distance of offset values
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_MIN [n]
CEC table: Starting position
DOUBLE
Description:
AN_CEC_MIN[n]
Start position of compensation table
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_MAX [n]
CEC table: End position
DOUBLE
Description:
AN_CEC_MAX[n]
End position of compensation table
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
-
0
-
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
577
List of system variables
3.20 Interpolatory compensation
$AN_CEC_MAX [n]
CEC table: End position
DOUBLE
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_DIRECTION [n]
CEC table: Direction-dependence
INT
Description:
$AN_CEC_DIRECTION[n]
Activates direction-dependent action of compensation table
0: both traversing directions of the basic axis
1: positive traversing direction of the basic axis
-1: negative traversing direction of the basic axis
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
0
-1
1
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_MULT_BY_TABLE [n]
CEC table: Multiplication
INT
Description:
$AN_CEC_MULT_BY_TABLE[n]
Number of table whose output value is to be multiplied by the output
value of the compensation table
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
0
0
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_IS_MODULO [n]
CEC table: Modulo functionality
BOOL
Description:
$AN_CEC_IS_MODULO[n]
TRUE: Cyclical repetition of compensation table
FALSE: No cyclical repetition of compensation table
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
FALSE
FALSE
TRUE
Read/Write properties:
System variables
578
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.21 NC-specific protection zones
$AN_CEC_IS_MODULO [n]
CEC table: Modulo functionality
BOOL
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$AN_CEC_TYPE [n]
CEC table: table type
INT
Description:
$AN_CEC_TYPE[n]
0: no special table type
1: table, cylinder error compensation type
Index 1:
n: No. of compensation table 0 - (maximum value can be set via MD)
Unit
Init value
Min
Max
-
0
0
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
3.21
NC-specific protection zones
$SN_PA_ACTIV_IMMED [n]
Protection zone immediately active
BOOL
Description:
$SN_PA_ACTIV_IMMED[n]
n: Number of the protection area
Protection area immediately active after boot
TRUE: The protection area is activated immediately after
the control has booted and the axes have been referenced
FALSE: The protection area is not immediately active
Note: This variable can only be written as a system variable and is not affected by
the NC commands between NPROTDEF(..) and EXECUTE(n).
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Unit
Init value
Min
Max
-
FALSE
FALSE
TRUE
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
579
List of system variables
3.21 NC-specific protection zones
$SN_PA_ACTIV_IMMED [n]
Protection zone immediately active
BOOL
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$SN_PA_T_W [n]
Protection zone specific to workpiece/tool
CHAR
Description:
$SN_PA_T_W[n]
n: Number of the protection area
Protection area specific to workpiece/tool
0: Workpiece-specific protection area
3: Tool-specific protection area
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Unit
Init value
Min
Max
-
0
0
3
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$SN_PA_ORI [n]
Orientation of protection zone
INT
Description:
$SN_PA_ORI[n]
n: Number of the protection area
Orientation of protection area
0: Polygon curve in the plane formed by the 1st and 2nd geo axes (G17)
1: Polygon curve in the plane formed by the 3rd and 1st geo axes (G18)
2: Polygon curve in the plane formed by the 2nd and 3rd geo axes (G19)
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Unit
Init value
Min
Max
-
0
0
2
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
580
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.21 NC-specific protection zones
$SN_PA_LIM_3DIM [n]
Scope of application-limiting protection zone
INT
Description:
$SN_PA_LIM_3DIM[n]
n: Number of the protection area
Identifier for limitation of protection area in the axis
perpendicular to the polygon curve
0: No limitation
1: Limitation in the positive direction
2: Limitation in the negative direction
3: Limitation in both directions
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Unit
Init value
Min
Max
-
0
0
3
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$SN_PA_PLUS_LIM [n]
Limitation of protection zone applicate plus
DOUBLE
Description:
$SN_PA_PLUS_LIM[n]
n: Number of the protection area
Positive limitation of protection areas in the axis
perpendicular to the polygon curve
Effective only if $SN_PA_LIM_3DIM[n]=1 or = 3.
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Unit
Init value
Min
Max
mm
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
581
List of system variables
3.21 NC-specific protection zones
$SN_PA_MINUS_LIM [n]
Limitation of protection zone applicate minus
DOUBLE
Description:
$SN_PA_MINUS_LIM[n]
n: Number of the protection area
Negative limitation of protection area in minus direction in the axis
perpendicular to the polygon curve
Effective only if $SN_PA_LIM_3DIM[n]=2 or = 3.
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Unit
Init value
Min
Max
mm
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$SN_PA_CONT_NUM [n]
Number of valid contour elements
INT
Description:
$SN_PA_CONT_NUM[n]
n: Number of the protection area
Number of valid contour elements
Protection areas need at least 2 contour elements for a complete description.
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Unit
Init value
Min
Max
-
0
0
10
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
582
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.21 NC-specific protection zones
$SN_PA_CONT_TYP [n,m]
Type of the contour element
INT
Description:
$SN_PA_CONT_TYP[n,m]
n: Number of the protection area
m: Number of the contour element
Type (G1, G2, G3) of contour element
=0: Contour not defined
=1: Straight
=2: Circle element (clockwise)
=3: Circle element (counterclockwise)
The end point is determined by $SN_PA_CONT_ORD or $SN_PA_CONT_ABS. With contour types G2 and G3, $SN_PA_CENT_ORD or
$SN_PA_CENT_ABS determines the center point of the circle element.
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Index 2:
(0 - MAXNUM_CONTOURNO_PROTECTAREA)
Unit
Init value
Min
Max
-
0
0
3
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$SN_PA_CONT_ORD [n,m]
End point of contour element (ordinate)
DOUBLE
Description:
$SN_PA_CONT_ORD[n,m]
n: Number of the protection area
m: Number of the contour element
End point of contour element (ordinate)
See also description of $SN_PA_CONT_TYP
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Index 2:
(0 - MAXNUM_CONTOURNO_PROTECTAREA)
Unit
Init value
Min
Max
mm
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
583
List of system variables
3.21 NC-specific protection zones
$SN_PA_CONT_ORD [n,m]
End point of contour element (ordinate)
DOUBLE
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$SN_PA_CONT_ABS [n,m]
End point of contour element (abscissa)
DOUBLE
Description:
$SN_PA_CONT_ABS[n,m]
n: Number of the protection area
m: Number of the contour element
End point of contour element (abscissa)
See also description of $SN_PA_CONT_TYP
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Index 2:
(0 - MAXNUM_CONTOURNO_PROTECTAREA)
Unit
Init value
Min
Max
mm
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$SN_PA_CENT_ORD [n,m]
Center point of contour element (ordinate)
DOUBLE
Description:
$SN_PA_CENT_ORD[n,m]
n: Number of the protection area
m: Number of the contour element
Center point of contour element (ordinate)
Relevant only if $SN_PA_CONT_TYP[n,m] = 2 or = 3.
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Index 2:
(0 - MAXNUM_CONTOURNO_PROTECTAREA)
Unit
Init value
Min
Max
mm
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
584
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$SN_PA_CENT_ABS [n,m]
Center point of contour element (abscissa)
DOUBLE
Description:
$SN_PA_CENT_ABS[n,m]
n: Number of the protection area
m: Number of the contour element
Center point of contour element (abscissa)
Relevant only if $SN_PA_CONT_TYP[n,m] = 2 or = 3.
Note: This variable is not restored during REORG.
Note: This variable is saved during data backup.
Blocks: _N_NCK_PRO, _N_COMPLETE_PRO and _N_INITIAL_INI
Index 1:
The maximum dimension is defined via the $MN_MM_NUM_PROTECT_AREA_NCK.
Index 2:
(0 - MAXNUM_CONTOURNO_PROTECTAREA)
Unit
Init value
Min
Max
mm
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
X
7
-
Write:
X
-
7
X
7
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
3.22
Cycles parameterization
$C_A
ISO cycle parameter for address A
DOUBLE
Description:
$C_A
Value of programmed address A in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_B
ISO cycle parameter for address B
DOUBLE
Description:
$C_B
Value of programmed address B in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
585
List of system variables
3.22 Cycles parameterization
$C_B
ISO cycle parameter for address B
DOUBLE
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_C
ISO cycle parameter for address C
DOUBLE
Description:
$C_C
Value of programmed address C in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_D
ISO cycle parameter for address D
DOUBLE
Description:
$C_D
Value of programmed address D in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_E
ISO cycle parameter for address E
DOUBLE
Description:
$C_E
Value of programmed address E in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
System variables
586
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_E
ISO cycle parameter for address E
DOUBLE
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_F
ISO cycle parameter for address F
DOUBLE
Description:
$C_F
Value of programmed address F in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_G
ISO cycle parameter for address G
DOUBLE
Description:
$C_G
Value of programmed address G in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_H
ISO cycle parameter for address H
DOUBLE
Description:
$C_H
Value of programmed address H in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
587
List of system variables
3.22 Cycles parameterization
$C_I [10]
ISO cycle parameter for address I
DOUBLE
Description:
$C_I[]
Value of programmed address I in ISO2/3 mode for cycle parameterization
and macro programming with G65/G66.
Up to 10 entries are possible for macro programming with G65/G66 in the block with the address I. The values are located in the array in the
sequence they were programmed.
Index 1:
Up to 10 entries are possible for macro programming with G65/G66 in the block with address I.were programmed.
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_J [10]
ISO cycle parameter for address J
DOUBLE
Description:
$C_J[]
Value of programmed address J in ISO2/3 mode for cycle parameterization
and macro programming with G65/G66.
Up to 10 entries are possible for macro programming with G65/G66 in the block with the address J. The values are located in the array in the
sequence they were programmed.
Index 1:
Up to 10 entries are possible for macro programming with G65/G66 in the block with address J.
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_K [10]
ISO cycle parameter for address K
DOUBLE
Description:
$C_K[]
Value of programmed address K in ISO2/3 mode for cycle parameterization
and macro programming with G65/G66.
Up to 10 entries are possible for macro programming with G65/G66 in the block with the address K. The values are located in the array in the
sequence they were programmed.
Index 1:
Up to 10 entries are possible for macro programming with G65/G66 in the block with the address K.
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
System variables
588
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_K [10]
ISO cycle parameter for address K
DOUBLE
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_L
ISO cycle parameter for address L
DOUBLE
Description:
$C_L
Value of programmed address L in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_M
ISO cycle parameter for address M
DOUBLE
Description:
$C_M
Value of programmed address M in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_N
ISO cycle parameter for address N
DOUBLE
Description:
$C_N
Value of programmed address N in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
589
List of system variables
3.22 Cycles parameterization
$C_O
ISO cycle parameter for address O
DOUBLE
Description:
$C_O
Value of programmed address O in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_P
ISO cycle parameter for address P
DOUBLE
Description:
$C_P
Value of programmed address P in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_Q
ISO cycle parameter for address Q
DOUBLE
Description:
$C_Q
Value of programmed address Q in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_R
ISO cycle parameter for address R
DOUBLE
Description:
$C_R
Value of programmed address R in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
System variables
590
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_R
ISO cycle parameter for address R
DOUBLE
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_S
ISO cycle parameter for address S
DOUBLE
Description:
$C_S
Value of programmed address S in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_T
Cycle parameter for address T
DOUBLE
Description:
$C_T
Value of programmed address T for cycle parameterization (ISO2/3 mode)
and T function substitution (ISO2/3 and standard modes)
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_U
ISO cycle parameter for address U
DOUBLE
Description:
$C_U
Value of programmed address U in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
591
List of system variables
3.22 Cycles parameterization
$C_U
ISO cycle parameter for address U
DOUBLE
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_V
ISO cycle parameter for address V
DOUBLE
Description:
$C_V
Value of programmed address V in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_W
ISO cycle parameter for address W
DOUBLE
Description:
$C_W
Value of programmed address W in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_X
ISO cycle parameter for address X
DOUBLE
Description:
$C_X
Value of programmed address X in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
592
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_Y
ISO cycle parameter for address Y
DOUBLE
Description:
$C_Y
Value of programmed address Y in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_Z
ISO cycle parameter for address Z
DOUBLE
Description:
$C_Z
Value of programmed address Z in ISO2/3 mode for cycle parameterization
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_DL
ISO parameter for address DL
DOUBLE
Description:
Value of programmed address DL (additive tool offset) in the case of a
subprogram call by M/T function substitution
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_PI
ISO cycle parameter for address P
DOUBLE
Description:
Program number of interrupt routine programmed with M96 Pxx in ISO2/3 mode
Unit
Init value
Min
Max
-
0.0
-1.8E+308
1.8E+308
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
593
List of system variables
3.22 Cycles parameterization
$C_PI
ISO cycle parameter for address P
DOUBLE
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_TS
Tool identifier for T function substitution
STRING
Description:
Returns the string of the programmed tool identifier when the T function or TCA command are replaced.
Tool identifiers can only be programmed with tool management active or with tool monitoring without magazine management.
Index 3:
Maximum string length
Unit
Init value
Min
Max
-
""
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_A_PROG
ISO cycle parameter for address A
INT
Description:
$C_A_PROG
Address A is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
594
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_B_PROG
ISO cycle parameter for address B
INT
Description:
$C_B_PROG
Address B is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_C_PROG
ISO cycle parameter for address C
INT
Description:
$C_C_PROG
Address C is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
595
List of system variables
3.22 Cycles parameterization
$C_D_PROG
ISO cycle parameter for address D
INT
Description:
$C_D_PROG
Address D is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_E_PROG
ISO cycle parameter for address E
INT
Description:
$C_E_PROG
Address E is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
596
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_F_PROG
ISO cycle parameter for address F
INT
Description:
$C_F_PROG
Address F is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_G_PROG
ISO cycle parameter for address G
INT
Description:
$C_G_PROG
G function for cycle call is programmed in this block
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
597
List of system variables
3.22 Cycles parameterization
$C_H_PROG
ISO cycle parameter for address H
INT
Description:
$C_H_PROG
Address H is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_I_PROG
ISO cycle parameter for address I
INT
Description:
$C_I_PROG
Address I is programmed in a block with cycle macro call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
598
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_J_PROG
ISO cycle parameter for address J
INT
Description:
$C_J_PROG
Address J is programmed in a block with cycle macro call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_K_PROG
ISO cycle parameter for address K
INT
Description:
$C_K_PROG
Address K is programmed in a block with cycle macro call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
599
List of system variables
3.22 Cycles parameterization
$C_L_PROG
ISO cycle parameter for address L
INT
Description:
$C_L_PROG
Address L is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_M_PROG
ISO cycle parameter for address M
INT
Description:
$C_M_PROG
Address M is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
600
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_N_PROG
ISO cycle parameter for address N
INT
Description:
$C_N_PROG
Address N is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_O_PROG
ISO cycle parameter for address O
INT
Description:
$C_O_PROG
Address O is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
601
List of system variables
3.22 Cycles parameterization
$C_P_PROG
ISO cycle parameter for address P
INT
Description:
$C_P_PROG
Address P is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_Q_PROG
ISO cycle parameter for address Q
INT
Description:
$C_Q_PROG
Address Q is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
602
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_R_PROG
ISO cycle parameter for address R
INT
Description:
$C_R_PROG
Address R is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_S_PROG
ISO cycle parameter for address S
INT
Description:
$C_S_PROG
Address S is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
603
List of system variables
3.22 Cycles parameterization
$C_T_PROG
ISO cycle parameter for address T
INT
Description:
$C_T_PROG
Address T is programmed in a block with cycle call or T function substitution
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_U_PROG
ISO cycle parameter for address U
INT
Description:
$C_U_PROG
Address U is programmed in the current block
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
604
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_V_PROG
ISO cycle parameter for address V
INT
Description:
$C_V_PROG
Address V is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_W_PROG
ISO cycle parameter for address W
INT
Description:
$C_W_PROG
Address W is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
605
List of system variables
3.22 Cycles parameterization
$C_X_PROG
ISO cycle parameter for address X
INT
Description:
$C_X_PROG
Address X is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_Y_PROG
ISO cycle parameter for address Y
INT
Description:
$C_Y_PROG
Address Y is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
606
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_Z_PROG
ISO cycle parameter for address Z
INT
Description:
$C_Z_PROG
Address Z is programmed in a block with cycle call
0 = Not programmed
1 = Programmed
3 = Programmed incrementally
Bit 0 is set if the address is programmed absolutely or incrementally.
Bit 1 is set in addition if the address is programmed incrementally.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_PI_PROG
ISO cycle parameter for address P
INT
Description:
0 = Not programmed
1 = M96 Pxx interrupt routine programmed
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_G60_PROG
ISO cycle parameters programmed for G60 in block
INT
Description:
0 = not programmed
1 = G60 is programmed in the cycle call block
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
607
List of system variables
3.22 Cycles parameterization
$C_DL_PROG
ISO cycle parameter for address DL
INT
Description:
Interrogation as to whether address DL (additive tool offset) has been
programmed for a subprogram call per M/T function substitution.
0 = Not programmed
1 = An additive tool offset has been programmed under address DL.
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_TS_PROG
Parameter for T function replacement
INT
Description:
Query whether a tool identifier was programmed when the T function or TCA command
were replaced.
0 = Not programmed
1 = Programmed
Tool identifiers can only be programmed with tool management active or with tool monitoring without magazine management.
Unit
Init value
Min
Max
-
0
0
1
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_ALL_PROG
Bit pattern specifying which addresses are programmed
INT
Description:
$C_ALL_PROG
Bit pattern of all programmed addresses in a block with cycle call
Bit0 = Address "A"
Bit25 = Address "Z"
Bit = 1 -> Address programmed
Bit = 0 -> Address not programmed
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
System variables
608
List Manual, 10/2020, 6FC5397-6AP40-6BA4
List of system variables
3.22 Cycles parameterization
$C_ALL_PROG
Bit pattern specifying which addresses are programmed
INT
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_INC_PROG
Bit pattern specifying whether addresses are program-
INT
med incr.
Description:
$C_INC_PROG
Bit pattern of all incrementally programmed addresses in a block with cycle call
Bit0 = Address "A"
Bit25 = Address "Z"
Bit = 1 -> Address incrementally programmed
Bit = 0 -> Address absolutely programmed
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_TYP_PROG
Bit pattern specifying whether addresses are progr. as
INT
INT/REAL
Description:
$C_TYP_PROG
Bit pattern of all addresses programmed with value INT or REAL
Bit0 = Address "A"
Bit25 = Address "Z"
Bit = 1 -> Address programmed with real value
Bit = 0 -> Address programmed with int value
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
System variables
List Manual, 10/2020, 6FC5397-6AP40-6BA4
609
List of system variables
3.22 Cycles parameterization
$C_I_NUM
Number of "I" addresses programmed in block
INT
Description:
$C_I_NUM
The number of "I" addresses programmed in the block is stored in $C_I_NUM.
This value is always 1 for cycle programming if bit 0 is set in
$C_I_PROG.
In the case of macro programming with G65/G66, this variable contains the number of
"I" addresses programmed in the block (max. 10).
Unit
Init value
Min
Max
-
0
-2147483648
10
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_J_NUM
Number of "J" addresses programmed in block
INT
Description:
$C_J_NUM
The number of "J" addresses programmed in the block is stored in $C_J_NUM.
This value is always 1 for cycle programming if bit 0 is set in
$C_J_PROG.
In the case of macro programming with G65/G66, this variable contains the number of
"J" addresses programmed in the block (max. 10).
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
TP
SA
TP/SA safety
NC-Variable
Safety
OEM-CC
Read:
X
-
7
-
0
-
Write:
X
-
7
-
0
-
Axis entry:
Overlap chan-
channel-specific
nel:
Scan mode:
Not classified
Link:
No restrictions
$C_K_NUM
Number of "K" addresses programmed in block
INT
Description:
$C_K_NUM
The number of "K" addresses programmed in the block is stored in $C_K_NUM.
This value is always 1 for cycle programming if bit 0 is set in
$C_K_PROG.
In the case of macro programming with G65/G66, this variable contains the number of
"K" addresses programmed in the block (max. 10).
Unit
Init value
Min
Max
-
0
-2147483648
2147483647
Read/Write properties:
System variables
610
List Manual, 10/2020, 6FC5397-6AP40-6BA4