Главная Automobile - Toyota Toyota Sequoia - Repair manual 2005 year
поиск по сайту правообладателям
|
|
содержание .. 376 377 378 379 ..
– DIAGNOSTICS SUPPLEMENTAL RESTRAINT SYSTEM DI–1307 1501 4 Replace front seat assembly RH. (a) Turn the ignition switch to the LOCK position. (b) Disconnect the negative (–) terminal cable from the battery, and wait for at least 90 seconds. (c) Replace the front seat assembly RH (see page HINT: NEXT 5 Perform zero point calibration. (a) Connect the negative (–) terminal cable to the battery. (b) Connect the hand–held tester to the DLC3. (c) Turn the ignition switch to the ON position. (d) Using the hand–held tester, perform ”Zero point calibration” (see page ). OK: The ”COMPLETED” is displayed. NG OK 6 Perform sensitivity check. Using the hand–held tester, perform ”Sensitivity check” (see page OK: Standard value: 27 to 33 kg (59.52 to 72.75 lb) NG OK |