Toyota Highlander (2018 year). Manual - part 91

376

5-6. Using an external device

■

About iPod

●

“Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an elec-
tronic accessory has been designed to connect specifically to iPod or
iPhone, or iPad, respectively, and has been certified by the developer to
meet Apple performance standards.

●

Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this acces-
sory with iPod, iPhone or iPad may affect wireless performance.

●

iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks
of Apple Inc., registered in the U.S. and other countries. Lightning is a trade-
mark of Apple Inc.

■

iPod cover art

●

Depending on the iPod and songs in the iPod, iPod cover art may be dis-
played.

●

This function can be changed to on/off. (

→P. 360)

●

It may take time to display iPod cover art, and the iPod may not be operated
while the cover art display is in process.

●

Only iPod cover art that is saved in JPEG format can be displayed.

■

iPod functions

●

When an iPod is connected and the audio source is changed to iPod mode,
the iPod will resume play from the same point in which it was last used.

●

Depending on the iPod that is connected to the system, certain functions
may not be available. If a function is unavailable due to a malfunction (as
opposed to a system specification), disconnecting the device and recon-
necting it may resolve the problem.

●

While connected to the system, the iPod cannot be operated with its own
controls. It is necessary to use the controls of the vehicle's Entune Audio
instead.

●

When the battery level of an iPod is very low, the iPod may not operate. If
so, charge the iPod before use.

●

Compatible models (

→P. 378)

377

5-6. Using an external device

Audi

o system

■

iPod problems
To resolve most problems encountered when using your iPod, disconnect
your iPod from the vehicle iPod connection and reset it. For instructions on
how to reset your iPod, refer to your iPod Owner's Manual.

■

Error messages

Message

Cause/Correction procedures

“Connection error. Please
consult your Owner’s Man-
ual for instructions on how
to connect the iPod.”

This indicates a problem in the iPod or its con-
nection.

“No music files found.”

This indicates that there is no music data in
the iPod.

“No videos found.”

This indicates that no video files are included
in the iPod.

“There are no songs avail-
able for playback. Please
add compatible files to
your iPod.”

This indicates that songs are not found in a
selected playlist.

“iPod authorization unsuc-
cessful.”

This indicates that the display Entune Audio
failed to authorize the iPod.
Please check your iPod.

378

5-6. Using an external device

■

Compatible models
The following iPod

, iPod nano

, iPod classic

, iPod touch

and iPhone

devices can be used with this system.

●

Made for

• iPod touch (5th generation)
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod with video
• iPod nano (7th generation)
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPhone 4s
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone

This system only supports audio playback.
Depending on differences between models or software versions etc., some
models might be incompatible with this system.

WARNING

■

While driving
Do not connect an iPod or operate the controls.

NOTICE

■

To prevent damage to the iPod or its terminals

●

Do not leave the iPod in the vehicle. The temperature inside the vehicle
may become high, resulting in damage to the iPod.

●

Do not push down on or apply unnecessary pressure to the iPod while it is
connected.

●

Do not insert foreign objects into the port.