|
|
(b) Remove the clutch drum thrust washer and 2 thrust needle roller bearings. 30. INSPECT NO. 2 1-WAY CLUTCH ASSEMBLY 31. REMOVE NO. 2 1-WAY CLUTCH ASSEMBLY (a) Remove the No. 2 1-way clutch and clutch drum thrust washer from the clutch drum and input shaft assembly. 32. FIX CLUTCH DRUM AND INPUT SHAFT ASSEMBLY (a) Place the oil pump onto the torque converter clutch, and then place the clutch drum and input shaft assembly onto the oil pump. 33. REMOVE REVERSE CLUTCH HUB SUB-ASSEMBLY (a) Using a screwdriver, remove the snap ring. A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS... |