|
|
Content .. 1576 1577 1578 1579 ..
P0125 (Insufficient Coolant Temperature for Closed Loop Fuel Control) P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135 (Throttle Position Sensor) P0171, P0172, P0174, P0175 (Fuel System) P0301 - P0308 (Misfire) P0335 (Crankshaft Position Sensor) P1340 (Camshaft Position Sensor) P0340, P0342, P0343, P0345, P0347, P0348 (VVT Sensor) P0365, P0367, P0368, P0390, P0392, P0393 (Exhaust VVT Sensor) P0351 - P0358 (Igniter) P0451, P0452, P0453 (EVAP System) P0500 (Vehicle Speed Sensor) P0705 (Shift Lever Position Switch) P0748, P0778 (Pressure Control Solenoid) P0973, P0974, P0976, P0977, P0979, P0980, P0982, P0983, P0985, P0986 (Shift Solenoid) Engine Running TYPICAL MALFUNCTION THRESHOLDS Either condition is met 1 or 2 A. Engine speed - Target engine speed Less than -100 rpm, or more than 150 rpm (A/C off and NSW off) Less than -100 rpm, or more than 200 rpm (A/C on or NSW on) B. IAC flow rate learned value 2.48 L/sec. or less, or 11.0 L/sec. or more for 5 seconds or more 5 times or more (a) Engine speed - Target engine speed Less than -100 rpm, or more than 150 rpm (A/C off and NSW off) Less than -100 rpm, or more than 200 rpm (A/C on or NSW on) (b) Vehicle condition Stopped after being driven at 10 km/h (6.25 mph) or more D. Either condition is met (c) or (d) (c) IAC flow rate learned value 2.48 L/sec. or less, or 11.0 L/sec. or more CONFIRMATION DRIVING PATTERN 3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: P0505; Idle... |