|
|
Content .. 1355 1356 1357 1358 ..
(a) Install the hood with the 4 bolts. Torque: 13 N·m {133 kgf·cm, 10ft·lbf} Install the hood support while supporting the hood by hand. (c) Attach the hood support clips. NOTICE: Check that the hood support is engaged in the ball joint and that it cannot be pulled out. 57. ADJUST HOOD SUB-ASSEMBLY 58. INSTALL NO. 1 ENGINE UNDER COVER 59. INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY (a) Install the front wiper motor and link
. 60. INSPECT IGNITION TIMING 61. INSPECT ENGINE IDLE SPEED 62. INSPECT CO/HC 63. CHECK ENGINE OIL LEVEL 64. CHECK ENGINE COOLANT LEVEL 1UR-FE ENGINE MECHANICAL: ENGINE ASSEMBLY: INSTALL... |