|
|
sequence. 2. REGISTER RECOGNITION CODE (USING TECHSTREAM) HINT: For detailed procedures, refer to the prompts on the tester screen. The number of currently registered a. Turn the ignition switch ON. b. Enter the following menus: Techstream - Select: Body Electrical / Main Body / Wireless Registration. c. Press both the LOCK and UNLOCK switches at the same time for 1 to 1.5 seconds. d. Press either switch for more than 1 second within 3 seconds. e. Check the response to the registration completion. Fig. 53: Register Recognition Code (Using Techstream) HINT: If the LOCK-UNLOCK operation occurs twice, the registration of the recognition code has If registering another transmitter, repeat the procedures after the tester operation. All 4 f. Perform either of the following to complete the registration of the recognition codes: Use the Techstream to send a completion command. Disconnect the Techstream.
2009 Toyota Tundra 2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
|