|
|
3UR-FE CHARGING SERVICE DATA 3UR-FE CHARGING - SERVICE DATA TORQUE SPECIFICATIONS 3UR-FE CHARGING - TORQUE SPECIFICATIONS 3UR-FBE CHARGING Retainer plate x Generator drive end frame 2.3 23 20 in.*lbf Generator coil x Generator drive end frame 5.8 59 51 in.*lbf Generator brush holder x Generator coil 1.8 18 16 in.*lbf Generator rear end cover x Generator coil 4.6 47 41 in.*lbf Generator pulley x Generator rotor 133 1356 98 Battery Standard specific gravity 1.25 to 1.29 at 20°C (68°F) Charging circuit Standard amperage 10 A or less Standard voltage 13.2 to 14.8 V (when engine Charging circuit with Standard amperage 30 A or more Generator rotor Standard between the slip rings 100 A 2.3 to 2.7 ohms at 20°C (68°F) between the slip rings 150 A 1.5 to 1.9 ohms at 20°C (68°F) between the slip ring and rotor 10 kohms or higher Standard diameter 14.2 to 14.4 mm (0.559 to 0.567 Minimum diameter 14.0 mm (0.551 in.) Generator brush Standard exposed length 10.5 mm (0.413 in.) Minimum exposed length 4.5 mm (0.177 in.) Part Tightened N*m kgf*cm ft.*lbf Generator x V-ribbed belt tensioner 43 439 32 Generator wire x Generator 9.8 100 87 in.*lbf Wire harness bracket x Generator 31 316 23 Retainer plate x Generator drive end frame 2.3 23 20 in.*lbf Generator coil x Generator drive end frame 5.8 59 51 in.*lbf Generator brush holder x Generator coil 1.8 18 16 in.*lbf Generator rear end cover x Generator coil 4.6 47 41 in.*lbf Generator pulley x Generator rotor 133 1356 98
2009 Toyota Tundra 2009 GENERAL INFORMATION Service Specifications - Tundra
|