|
|
1A-203 Engine General Information and Diagnosis: For Petrol Engine Model DTC Troubleshooting NOTE
Step Action Yes No 1 Was “Engine and Emission Control System Check” Go to Step 2. Go to “Engine and 2 Accelerator pedal position (APP) sensor assembly assembly has been mounted to vehicle body properly Is it OK? Go to Step 3. Reinstall accelerator 3 Accelerator pedal position sensor (main) and its circuit OFF. 2) Turn ON ignition switch, check “APP Sensor 1 Volt” displayed on scan tool. Is displayed voltage below 0.1 V? Go to Step 4. Intermittent trouble. 4 ECM voltage check (APP) sensor assembly with ignition switch turned OFF. 2) Check for proper connection to accelerator pedal position (APP) sensor assembly at “WHT”, “WHT/BLU” 3) If OK, measure voltage between “WHT” wire terminal of accelerator pedal position (APP) sensor assembly Is voltage 4 – 6 V? Go to Step 7. Go to Step 5. “BLU/GRN” “BLU/YEL” “ORN” “WHT/BLU” “WHT” “ORN BLU” I5JB0A110071-01 |