Suzuki Grand Vitara JB416 / JB420. Manual

1K-6 Exhaust System:

Specifications

Tightening Torque Specifications

S5JB0A1B07001

NOTE
The specified tightening torque is also described in the following.
“Exhaust System Components”

Reference:
For the tightening torque of fastener not specified in this section, refer to “Fastener Information in Section 0A”.

Fastening part

Tightening torque

Note

⋅m

kgf-m

lb-ft

Exhaust manifold bolt and nut

5.0

36.5

)

/ )

Exhaust pipe No.1 bracket bolt and nut

5.0

36.5

)

Exhaust No.1 pipe nut

5.0

36.5

)

Table of Contents 2- i

Section 2

CONTENTS

Suspension

Precautions .................................................2-1

Precautions............................................................. 2-1

Precautions on Suspension .................................. 2-1

Suspension General Diagnosis.............. 2A-1

Diagnostic Information and Procedures............2A-1

Suspension, Wheels and Tires Symptom

Diagnosis .......................................................... 2A-1

Specifications.......................................................2A-3

Wheel Alignment Specifications.......................... 2A-3

Front Suspension .................................... 2B-1

General Description .............................................2B-1

Front Suspension Construction........................... 2B-1
Front Wheel Alignment Construction .................. 2B-2

Repair Instructions ..............................................2B-2

Front Wheel Alignment Inspection and

Adjustment ........................................................ 2B-2

Front Strut Assembly Components ..................... 2B-4
Front Strut Assembly Removal and

Installation......................................................... 2B-5

Front Strut Assembly Disassembly and

Assembly .......................................................... 2B-7

Front Strut Assembly Check ............................... 2B-8
Front Wheel Hub Assembly and Steering

Knuckle Components........................................ 2B-9

Front Wheel Hub Assembly Removal and

Installation......................................................... 2B-9

Steering Knuckle Removal and Installation....... 2B-11
Front Wheel Hub, Disc, Nut and Bearing

Check.............................................................. 2B-12

Suspension Control Arm Removal and

Installation.......................................................2B-13

Suspension Control Arm / Bushing

Disassembly and Assembly ............................2B-15

Suspension Control Arm / Steering Knuckle

Check.............................................................. 2B-16

Suspension Control Arm Bushing Check.......... 2B-16
Suspension Control Arm Joint Check ...............2B-16
Front Suspension Frame, Stabilizer Bar and/

or Bushings Components................................2B-17

Front Suspension Frame, Stabilizer Bar and/

or Bushings Removal and Installation.............2B-18

Front Suspension Frame Check ....................... 2B-22

Front Stabilizer Bar, Bushing and/or Joint

Check ..............................................................2B-22

Front Suspension Fasteners Check..................2B-23

Specifications.....................................................2B-23

Tightening Torque Specifications......................2B-23

Special Tools and Equipment ...........................2B-24

Rear Suspension ..................................... 2C-1

General Description .............................................2C-1

Rear Suspension Construction ...........................2C-1
Rear Wheel Alignment Construction ...................2C-2

Repair Instructions ..............................................2C-2

Rear Wheel Alignment Inspection and

Adjustment ........................................................2C-2

Rear Shock Absorber and Rear Coil Spring

Components......................................................2C-4

Rear Shock Absorber Removal and

Installation .........................................................2C-5

Shock Absorber Check .......................................2C-6
Rear Coil Spring and Bump Stopper Removal

and Installation ..................................................2C-6

Rear Coil Spring Check.......................................2C-8
Rod and Arm Components..................................2C-9
Control Rod Removal and Installation...............2C-10
Control Rod / Bushing Disassembly and

Assembly.........................................................2C-12

Control Rod Check............................................2C-12
Trailing Rod Removal and Installation ..............2C-13
Trailing Rod / Bushing Disassembly and

Assembly.........................................................2C-14

Trailing Rod Check............................................2C-15
Lower Arm Removal and Installation ................2C-15
Lower Arm / Bushing Disassembly and

Assembly.........................................................2C-16

Lower Arm Check..............................................2C-17
Upper Arm Removal and Installation ................2C-17
Upper Arm / Bushing Disassembly and

Assembly.........................................................2C-19

Upper Arm Check..............................................2C-19
Rear Suspension Frame Components..............2C-20
Rear Suspension Frame Removal and

Installation .......................................................2C-21

Precautions: 2-1

Suspension

Precautions

Precautions on Suspension

S5JB0A2000001

Suspension Caution
Refer to “Suspension Caution in Section 00”.

Wheels and Tires Caution
Refer to “Wheels and Tires Caution in Section 00”.

General Precautions
Refer to “General Precautions in Section 00”.

Vehicle Lifting Points
Refer to “Vehicle Lifting Points in Section 0A”.

Fastener Caution
Refer to “Fastener Caution in Section 00”.

Fastener Information
Refer to “Fastener Information in Section 0A”.

Brake Caution
Refer to “Brakes Caution and Note in Section 00”.

Suzuki Grand Vitara JB416 / JB420. Manual - part 141