|
|
EXL-32 < SYSTEM DESCRIPTION > [XENON TYPE] DIAGNOSIS SYSTEM (BCM) HEADLAMP : CONSULT Function (BCM - HEADLAMP) (Xenon Type Headlamp) INFOID:0000000009653035 WORK SUPPORT * 1 : For models without auto light system, this item is displayed but is not operated. * 2 : For models without auto light system and all models for Canada, this item is displayed but is not operated. * 3 : Factory setting DATA MONITOR NOTE: Service item Setting item Setting CUSTOM A/LIGHT SET- TING* 1 MODE 1* 3 Normal MODE 2 More sensitive setting than normal setting (Turns ON earlier than normal opera- MODE 3 More sensitive setting than MODE 2 (Turns ON earlier than MODE 2) MODE 4 Less sensitive setting than normal setting (Turns ON later than normal operation.) BATTERY SAVER SET On* 3 With the exterior lamp battery saver function Off Without the exterior lamp battery saver function ILL DELAY SET* 1 MODE 1* 3 45 sec. Sets delay timer function timer operation time. MODE 2 Without the MODE 3 30 sec. MODE 4 60 sec. MODE 5 90 sec. MODE 6 120 sec. MODE 7 150 sec. MODE 8 180 sec. AUTO LIGHT LOGIC SET* 2 MODE 1* 3 With twilight ON custom & with wiper INT, LO and HI MODE 2 With twilight ON custom & with wiper LO and HI MODE 3 With twilight ON custom & without MODE 4 Without twilight ON custom & with wiper INT, LO and HI MODE 5 Without twilight ON custom & with wiper LO and HI MODE 6 Without twilight ON custom & without Monitor item [Unit] Description PUSH SW The switch status input from push-button ignition switch ENGINE STATE The engine status received from ECM with CAN communication VEH SPEED 1 The value of the vehicle speed received from combination meter via CAN communi- |