|
|
Content .. 1106 1107 1108 1109 ..
SEC-122 < DTC/CIRCUIT DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] SECURITY INDICATOR LAMP 1. Replace BCM. Refer to BCS-98, "Removal and Installation" . 2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. >> INSPECTION END 5. CHECK SECURITY INDICATOR LAMP CIRCUIT 1. Disconnect combination meter connector. 2. Check continuity between combination meter harness connector and BCM harness connector. 3. Check continuity between combination meter harness connector and ground. Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-93, "Removal and Installation" NO >> Repair or replace harness. Combination meter BCM Continuity Connector Terminal Connector Terminal M34 28 M121 23 Existed Combination meter Ground Continuity Connector Terminal M34 28 Not existed |