|
|
DLK-66 < DTC/CIRCUIT DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] DOOR LOCK ACTUATOR REAR LH : Component Function Check INFOID:0000000009950498 1. CHECK FUNCTION 1. Use CONSULT to perform Active Test (“DOOR LOCK”). 2. Touch “ALL LOCK” or “ALL UNLK” to check that it works normally. Is the inspection result normal? YES >> Door lock actuator is OK. NO >> Refer to DLK-67, "REAR RH : Diagnosis Procedure" . REAR LH : Diagnosis Procedure INFOID:0000000009950499 1. CHECK DOOR LOCK ACTUATOR INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect rear door lock assembly LH connector. 3. Check voltage between rear door lock assembly LH harness connector and ground. Is the inspection result normal? YES >> Replace rear door lock assembly LH. Refer to DLK-216, "DOOR LOCK : Removal and Installa- . NO >> GO TO 2. 2. CHECK DOOR LOCK ACTUATOR CIRCUIT 1. Disconnect BCM connector and all door lock actuator connector. 2. Check continuity between BCM harness connector and rear door lock assembly LH harness connector. 3. Check continuity between BCM harness connector and ground. Is the inspection result normal? YES >> Replace BCM. Refer to BCS-88, "Removal and Installation" NO >> Repair or replace harness. REAR RH REAR RH : Description INFOID:0000000009950500 Locks/unlocks the door with the signal from BCM. REAR RH : Component Function Check INFOID:0000000009950501 1. CHECK FUNCTION 1. Use CONSULT to perform Active Test (“DOOR LOCK”). (+) (–) Condition Voltage (V) (Approx.) Rear door lock assembly LH Connector Terminal D65 1 Ground Door lock and unlock switch Lock 0 → Battery voltage → 0 2 Unlock 0 → Battery voltage → 0 BCM Rear door lock assembly LH Continuity Connector Terminal Connector Terminal M69 55 D65 2 Existed M70 65 1 BCM Ground Continuity Connector Terminal M69 55 Not existed M70 65 |