|
|
EXCESSIVE ABS FUNCTION OPERATION FREQUENCY BRC-97 < SYMPTOM DIAGNOSIS > [VDC/TCS/ABS] C D E G H I J K L M A B BRC N O P EXCESSIVE ABS FUNCTION OPERATION FREQUENCY Diagnosis Procedure INFOID:0000000009267666 1. CHECK START Check front and rear brake force distribution using a brake tester. YES >> GO TO 2 NO >> Check brake system. 2. CHECK FRONT AND REAR AXLE Make sure that there is no excessive play in the front and rear axles. Refer to front: Is the inspection result normal? YES >> GO TO 3 NO >> Repair or replace malfunctioning components. 3. CHECK WHEEL SENSOR AND SENSOR ROTOR Check the following: • Wheel sensor installation for damage • Sensor rotor installation for damage • Wheel sensor connector • Wheel sensor harness YES >> GO TO 4 NO >> • Replace wheel sensor BRC-104, "FRONT WHEEL SENSOR : Removal and Installation" (front) BRC-107, "REAR SENSOR ROTOR : Removal and Installation" • Replace sensor rotor BRC-107, "FRONT SENSOR ROTOR : Removal and Installation" BRC-107, "REAR SENSOR ROTOR : Removal and Installation" • Repair harness. 4. CHECK ABS WARNING LAMP DISPLAY Make sure that the ABS warning lamp is turned off after the ignition switch is turned ON or when driving. YES >> Inspection End. NO >> Perform self diagnostic result. Refer to |