|
|
BCS U0415 VEHICLE SPEED BCS-61 < DTC/CIRCUIT DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J K L B A O P N U0415 VEHICLE SPEED DTC Logic INFOID:0000000009268647 DTC DETECTION LOGIC NOTE: • If DTC U0415 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to • If DTC U0415 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC CONFIRMATION PROCEDURE 1. DTC CONFIRMATION 1. Erase the DTC. 2. Turn ignition switch OFF. 3. Perform Self Diagnostic Result of BCM with CONSULT, after the ignition switch has been turned ON for 2 seconds or more. Is any DTC detected? YES >> Refer to NO >> Inspection End. Diagnosis Procedure INFOID:0000000009268648 1. ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF DIAGNOSTIC RESULT Perform Self Diagnostic Result of ABS with CONSULT. Refer to BRC-32, "CONSULT Function (ABS)" . Is any DTC detected? YES >> Perform the trouble diagnosis related to the detected DTC. Refer to . NO >> GO TO 2. 2. CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIRCUIT Check ABS actuator and electric unit (control unit) power and ground. Refer to . Is the inspection result normal? YES >> GO TO 3. NO >> Repair or replace harness or connectors. 3. COMBINATION METER SELF DIAGNOSTIC RESULT Perform Self Diagnostic Result of METER M&A with CONSULT. Refer to . Is any DTC detected? YES >> Perform the trouble diagnosis related to the detected DTC. Refer to . NO >> Refer to GI-45, "Intermittent Incident" . CONSULT Display DTC Detection Condition Probable Cause VDC CAN CIR2 When the vehicle speed signal received from the • ABS system |