|
|
EVC-388 < DTC/CIRCUIT DIAGNOSIS > CHARGING STATUS INDICATOR CHARGING STATUS INDICATOR Component Function Check INFOID:0000000010120844 1. CHECK CHARGING STATUS INDICATOR FUNCTION With CONSULT 1. Turn power switch ON. 2. Select “CHARGE STAT INDICATOR 1” of “ACTIVE TEST” mode in “EV/HEV” with CONSULT. 3. Activate the charging status indicator 1 and check that the indicator illuminates. 4. Check charging status indicator 2 and 3 in the same way. YES >> INSPECTION END NO >> Proceed to EVC-388, "Diagnosis Procedure" Diagnosis Procedure INFOID:0000000010120845 1. CHECK CHARGING STATUS INDICATOR POWER SUPPLY 1. Turn power switch OFF. 2. Disconnect charging status indicator harness connector. 3. Check the voltage between charging status indicator harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> GO TO 2. 2. CHECK FUSE Pull out #11 fuse and check that the fuse is not fusing. YES >> GO TO 3. NO >> Replace the fuse after repair the applicable circuit. 3. CHECK CHARGING STATUS INDICATOR POWER SUPPLY CIRCUIT 1. Check the continuity between charging status indicator and the fuse terminal. 2. Also check harness for short to ground and short to power. YES >> Check 12V battery power supply circuit. NO >> Repair or replace error-detected parts. 4. CHECK CHARGING STATUS INDICATOR GROUND CIRCUIT 1. Disconnect VCM harness connector. 2. Check the continuity between charging status indicator harness connector and VCM harness connector. + − Voltage Charging status indicator Connector Terminal M101 4 Ground 12V battery voltage + − Continuity Charging status indicator Connector Terminal M201 4 #11 fuse terminal Existed |