|
|
AV MICROPHONE SIGNAL CIRCUIT AV-59 < DTC/CIRCUIT DIAGNOSIS > [AUDIO W/O NAVI (EXCEPT MEXICO)] C D E F G H I J K L M B A O P MICROPHONE SIGNAL CIRCUIT Diagnosis Procedure INFOID:0000000010122484 Regarding Wiring Diagram information, refer to 1. CHECK HARNESS BETWEEN BLUETOOTH ® CONTROL UNIT AND MICROPHONE 1. Turn power switch OFF. ® control unit connector B9 and microphone connector R3. 3. Check continuity between Bluetooth ® control unit connector B9 and microphone connector R3. 4. Check continuity between Bluetooth ® control unit connector B9 and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connectors. 2. CHECK MICROPHONE POWER SUPPLY 1. Connect Bluetooth ® control unit connector B9 and microphone connector R3. 2. Turn power switch ON. 3. Check voltage between microphone connector R3 and ground. Is the inspection result normal? YES >> GO TO 3. NO >> Replace Bluetooth ® control unit. Refer to AV-73, "Removal and Installation" . 3. CHECK MICROPHONE SIGNAL Check signal between terminals of Bluetooth ® control unit connector B9. Bluetooth ® control unit Microphone Continuity Connector Terminal Connector Terminal B9 7 R3 1 Yes 8 2 29 4 Bluetooth ® control unit Ground Continuity Connector Terminal B9 7 — No 29 Microphone Ground Voltage (Approx.) (+) (-) Connector Terminal R3 4 — 5V |