|
|
EXL-14 < SYSTEM DESCRIPTION > DIAGNOSIS SYSTEM (BCM) (WITH INTELLIGENT KEY SYSTEM) *: Factory setting DATA MONITOR Service item Setting item Setting AUTO LIGHT LOGIC SET MODE 1 NOTE: MODE 2 MODE 3 MODE 4 MODE 5 MODE 6 CUSTOM A/LIGHT SETTING MODE 1 * NOTE: MODE 2 MODE 3 MODE 4 BATTERY SAVER SET On * With the exterior lamp battery saver function Off Without the exterior lamp battery saver function Monitor item [Unit] Description PUSH SW The switch status input from push-button ignition switch ENGINE STATE The engine status received from ECM with CAN communication VEH SPEED 1 The value of the vehicle speed received from combination meter with CAN commu- HI BEAM SW Each switch status that BCM judges from the combination switch reading function HEAD LAMP SW1 HEAD LAMP SW2 PASSING SW FR FOG SW DOOR SW-DR The switch status input from front door switch (driver side) DOOR SW-AS The switch status input from front door switch (passenger side) DOOR SW-RR The switch status input from rear door switch RH DOOR SW-RL The switch status input from rear door switch LH DOOR SW-BK The switch status input from back door switch |