|
|
VENTILATION SEAT SWITCH INDICATOR SE-41 < COMPONENT DIAGNOSIS > [WITH VENTILATION SEAT] C D E F G H I K L M A B SE N O P VENTILATION SEAT SWITCH INDICATOR FRONT SEAT FRONT SEAT : Description INFOID:0000000003820978 Illuminates the indicator that indicates the operating status of front ventilation seat LO or HI mode. FRONT SEAT : Component Function Check INFOID:0000000003820979 1. CHECK FUNCTION Check that the related indicator lamp illuminates when front ventilation seat switch is set to LO or HI mode. Is the inspection result normal? YES >> Front ventilation seat switch indicator function is OK. NO >> Refer to SE-41, "FRONT SEAT : Diagnosis Procedure" . FRONT SEAT : Diagnosis Procedure INFOID:0000000003844066 1. CHECK FRONT VENTILATION SEAT SWITCH INDICATOR Check front ventilation seat switch indicator. Which side of indicator does not illuminate? Only LO mode or HI mode>>GO TO 3. 2. CHECK FRONT VENTILATION SEAT SWITCH INDICATOR POWER SUPPLY 1. Turn ignition switch OFF. 2. Disconnect front ventilation seat switch. 3. Turn ignition switch ON. 4. Check voltage between front ventilation seat switch harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> Repair or replace harness. 3. CHECK FRONT VENTILATION SEAT SWITCH Check front ventilation seat switch. SE-42, "FRONT SEAT : Component Inspection" . Is the inspection result normal? YES >> GO TO 4. NO >> Replace front ventilation seat switch. Refer to SE-106, "FRONT SEAT : Removal and Installation" . 4. CHECK FRONT VENTILATION SEAT SWITCH INDICATOR CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect front ventilation seat control unit connector. 3. Check continuity between front ventilation seat switch harness connector and front ventilation seat control (+) (–) Voltage (V) (Approx.) Front ventilation seat switch Connector Terminal Driver side M208 6 Ground Battery voltage Passenger side M209 |