|
|
REAR POWER WINDOW SWITCH PWC-19 < COMPONENT DIAGNOSIS > C D E F G H I J L M A B PWC N O P 4. Check continuity between power window main switch harness connector and ground. Is the inspection result normal? YES >> Replace power window main switch. Refer to PWC-85, "Removal and Installation" NO >> Repair or replace harness. 4. CHECK INTERMITTENT INCIDENT GI-35, "Intermittent Incident" . >> INSPECTION END Component Inspection INFOID:0000000003826009 1. CHECK REAR POWER WINDOW SWITCH 1. Turn ignition switch OFF. 2. Disconnect rear power window switch connector. 3. Check rear power window switch. Is the inspection result normal? YES >> INSPECTION END NO >> Replace rear power window switch. Refer to PWC-87, "Removal and Installation" Power window main switch Rear power window switch Continuity Connector Terminal Connector Terminal D5 1 LH D83 2 Existed 3 3 5 RH D103 3 7 2 Power window main switch Ground Continuity Connector Terminal D5 1 Not existed 3 5 7 Rear power window switch Terminal Rear power window switch condition Continuity •D83 (LH) •D103 (RH) 1 5 UP Existed 3 4 3 4 NEUTRAL 2 5 1 4 DOWN 2 5 |