|
|
|
FLUORESCENT LEAK DETECTOR HAC-105 < PRECAUTION > [WITHOUT 7 INCH DISPLAY] C D E F G H J K L M A B HAC N O P FLUORESCENT LEAK DETECTOR General Precautions INFOID:0000000003846404 CAUTION: • The A/C system contains a fluorescent leak detection dye used for locating refrigerant leakages. An ultraviolet (UV) lamp is required to illuminate the dye when inspecting for leakages. • Always wear fluorescence enhancing UV safety goggles to protect eyes and enhance the visibility of the fluorescent dye. • The fluorescent dye leak detector is not a replacement for an electrical leak detector (SST: J-41995). The fluorescent dye leak detector should be used in conjunction with an electrical leak detector • Read and follow all manufacture operating instructions and precautions prior to performing the work for the purpose of safety and customer satisfaction. • A compressor shaft seal should not necessarily be repaired because of dye seepage. The compres- sor shaft seal should only be repaired after confirming the leakage with an electrical leak detector • Always remove any remaining dye from the leakage area after repairs are completed to avoid a mis- diagnosis during future service. • Never allow dye to come into contact with painted body panels or interior components. Clean imme- diately with the approved dye cleaner if dye is spilled. Fluorescent dye left on a surface for an • Never spray the fluorescent dye cleaning agent on hot surfaces (engine exhaust manifold, etc.). HFC-134a (R-134a) leak detection dye in CFC-12 (R-12) A/C system, or CFC-12 (R-12) leak detection • The fluorescent properties of the dye remains for three or more years unless a compressor malfunc- tion occurs. IDENTIFICATION NOTE: IDENTIFICATION LABEL FOR VEHICLE Vehicles with factory installed fluorescent dye have an identification label on the front side of hood. |