|
|
EXL-62 < COMPONENT DIAGNOSIS > [XENON TYPE] FRONT FOG LAMP CIRCUIT FRONT FOG LAMP CIRCUIT Component Function Check INFOID:0000000003773564 1. CHECK FRONT FOG LAMP OPERATION IPDM E/R AUTO ACTIVE TEST 1. Activate IPDM E/R auto active test. Refer to PCS-11, "Diagnosis Description" . 2. Check that the front fog lamp is turned ON. CONSULT-III ACTIVE TEST 1. Select “EXTERNAL LAMPS” of IPDM E/R active test item. 2. With operating the test items, check that the front fog lamp is turned ON. Is the front fog lamp turned ON? YES >> Front fog lamp circuit is normal. NO >> Refer to . Diagnosis Procedure INFOID:0000000003773565 1. CHECK FRONT FOG LAMP FUSE 1. Turn the ignition switch OFF. 2. Check that the following fuse is not fusing. Is the fuse fusing? YES >> GO TO 2. NO >> GO TO 3. 2. CHECK FRONT FOG LAMP SHORT CIRCUIT 1. Disconnect IPDM E/R connector and the front fog connector. 2. Check continuity between the IPDM E/R harness connector and the ground. Does continuity exist? YES >> Repair the harnesses or connectors. And then replace the fuse. NO >> Replace the fuse. (Replace IPDM E/R if the fuse is fusing again.) 3. CHECK FRONT FOG LAMP BULB Check the applicable lamp bulb. YES >> GO TO 4. NO >> Replace the bulb. 4. CHECK FRONT FOG LAMP OUTPUT VOLTAGE CONSULT-III ACTIVE TEST 1. Disconnect the front fog lamp connector. 2. Turn the ignition switch ON. 3. Select “EXTERNAL LAMPS” of IPDM E/R active test item. Fog : Front fog lamp ON Off : Front fog lamp OFF Unit Location Fuse No. Capacity Front fog lamp IPDM E/R #58 15 A IPDM E/R Ground Continuity Connector Terminal RH E345 86 Not existed LH 87 |