Nissan Teana J32. Manual - part 348

 

  Index      Nissan     Nissan Teana J32 (2008 year) - Service and Repair Manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  346  347  348  349   ..

 

 

Nissan Teana J32. Manual - part 348

 

 

TAKE AWAY WARNING DOES NOT OPERATE

DLK-175

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

7.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-88, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 8.

NO

>> Repair or replace the malfunctioning parts.

8.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

ANY DOOR OPEN TO ALL DOORS CLOSED

ANY DOOR OPEN TO ALL DOORS CLOSED : Description

INFOID:0000000003795026

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-7, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-31, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

ANY DOOR OPEN TO ALL DOORS CLOSED : Diagnosis Procedure

INFOID:0000000003795027

1.

CHECK DOOR SWITCH

Check door switch (driver side).
Refer to 

DLK-57, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-93, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-50, "DTC Logic"

 (instrument center).

Refer to 

DLK-52, "DTC Logic"

 (console).

Refer to 

DLK-54, "DTC Logic"

 (trunk room).

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

PUSH-BUTTON IGNITION SWITCH OPERATION

DLK-176

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

TAKE AWAY WARNING DOES NOT OPERATE

PUSH-BUTTON IGNITION SWITCH OPERATION : Description

INFOID:0000000003795028

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-7, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-31, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

PUSH-BUTTON IGNITION SWITCH OPERATION : Diagnosis Procedure

INFOID:0000000003795029

1.

CHECK POWER POSITION

Check if ignition switch position is changing or not.

Does ignition switch position change?

YES

>> GO TO 2.

NO

>> Check DTC for BCM. Refer to 

DLK-153, "DTC Index"

.

2.

CHECK PUSH-BUTTON IGNITION SWITCH

Check push-button ignition switch.
Refer to 

PCS-63, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
Refer to 

DLK-94, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-93, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-50, "DTC Logic"

 (instrument center).

Refer to 

DLK-52, "DTC Logic"

 (console).

Refer to 

DLK-54, "DTC Logic"

 (trunk room).

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

INTELLIGENT KEY IS REMOVED FROM KEY SLOT

INTELLIGENT KEY IS REMOVED FROM KEY SLOT : Description

INFOID:0000000003795032

NOTE:

TAKE AWAY WARNING DOES NOT OPERATE

DLK-177

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-7, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-31, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

INTELLIGENT KEY IS REMOVED FROM KEY SLOT : Diagnosis Procedure

INFOID:0000000003795033

1.

CHECK KEY SLOT

Check key slot.
Refer to 

DLK-86, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-93, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-50, "DTC Logic"

 (instrument center).

Refer to 

DLK-52, "DTC Logic"

 (console).

Refer to 

DLK-54, "DTC Logic"

 (trunk room).

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-88, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

DLK-178

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE

INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE

Description

INFOID:0000000003795034

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-7, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-31, "WARNING FUNCTION : System

Description"

.

Diagnosis Procedure

INFOID:0000000003795035

1.

CHECK “LO- BATT OF KEY FOB WARN” SETTING IN “WORK SUPPORT”

Check “LO- BATT OF KEY FOB WARN” setting in “WORK SUPPORT”.
Refer to 

DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “LO- BATT OF KEY FOB WARN” setting in “WORK SUPPORT”.

2.

CHECK INTELLIGENT KEY BATTERY

Check Intelligent Key battery.
Refer to 

DLK-84, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-93, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-50, "DTC Logic"

 (instrument center).

Refer to 

DLK-52, "DTC Logic"

 (console).

Refer to 

DLK-54, "DTC Logic"

 (trunk room).

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-88, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

 

 

 

 

 

 

 

Content   ..  346  347  348  349   ..