Nissan Teana J32. Manual - part 33

MANUAL FUNCTION DOES NOT OPERATE

ADP-125

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

SYMPTOM DIAGNOSIS

MANUAL FUNCTION DOES NOT OPERATE

ALL COMPONENTS

ALL COMPONENTS : Diagnosis Procedure

INFOID:0000000003759225

1.

CHECK POWER SUPPLY AND GROUND CIRCUIT

Check power supply and ground circuit.
Refer to 

ADP-45, "DRIVER SEAT CONTROL UNIT : Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace harness.

2.

CHECK POWER SEAT SWITCH GROUND CIRCUIT

Check power seat switch ground circuit.
Refer to

ADP-57, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace harness.

3.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT SLIDING

SEAT SLIDING : Diagnosis Procedure

INFOID:0000000003846564

1.

CHECK SLIDING MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK SLIDING SWITCH

Check sliding switch.
Refer to 

ADP-46, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK SLIDING MOTOR

Check sliding motor.
Refer to 

ADP-68, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

ADP-126

< SYMPTOM DIAGNOSIS >

MANUAL FUNCTION DOES NOT OPERATE

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT RECLINING

SEAT RECLINING : Diagnosis Procedure

INFOID:0000000003846565

1.

CHECK RECLINING MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK RECLINING SWITCH

Check reclining switch.
Refer to 

ADP-48, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK RECLINING MOTOR

Check reclining motor.
Refer to 

ADP-70, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CONFIRM THE OPERATION

Check the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT LIFTING (FRONT)

SEAT LIFTING (FRONT) : Diagnosis Procedure

INFOID:0000000003846566

1.

CHECK LIFTING (FRONT) MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK LIFTING SWITCH (FRONT)

Check lifting switch (front).
Refer to 

ADP-50, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK LIFTING MOTOR (FRONT)

Check lifting motor (front).
Refer to 

ADP-72, "Component Function Check"

.

Is the inspection result normal?

MANUAL FUNCTION DOES NOT OPERATE

ADP-127

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT LIFTING (REAR)

SEAT LIFTING (REAR) : Diagnosis Procedure

INFOID:0000000003846567

1.

CHECK LIFTING (REAR) MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK LIFTING SWITCH (REAR)

Check lifting switch (rear).
Refer to 

ADP-52, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK LIFTING MOTOR (REAR)

Check lifting motor (rear).
Refer to 

ADP-74, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

ADP-128

< SYMPTOM DIAGNOSIS >

MEMORY FUNCTION DOES NOT OPERATE

MEMORY FUNCTION DOES NOT OPERATE

ALL COMPONENTS

ALL COMPONENTS : Diagnosis Procedure

INFOID:0000000003759223

1.

CHECK MANUAL OPERATION

Check manual operation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Refer to 

ADP-125, "ALL COMPONENTS : Diagnosis Procedure"

.

2.

PERFORM INITIALIZATION AND MEMORY STORING PROCEDURE

1.

Perform initialization procedure.
Refer to 

ADP-8, "SYSTEM INITIALIZATION : Special Repair Requirement"

.

2.

Perform memory storing procedure.
Refer to 

ADP-9, "MEMORY STORING : Special Repair Requirement"

.

3.

Check memory function.
Refer to 

ADP-19, "MEMORY FUNCTION : System Description"

.

Is the inspection result normal?

YES

>> Memory function is normal.

NO

>> GO TO 3.

3.

CHECK DTC

Check the following DTC.
Vehicle speed signal
• “Self Diagnostic Result” with ABS actuator and electric unit (control unit). Refer to 

BRC-48, "DTC No. Index"

.

• “Self Diagnostic Result” with METER. Refer to 

MWI-67, "DTC Index"

.

Selector lever in P position signal, ignition position signal and key slot signal.
• “Self Diagnostic Result” with BCM. Refer to 

ADP-110, "DTC Index"

.

• “Self Diagnostic Result” with TCM. Refer to 

TM-121, "DTC Index"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK SEAT MEMORY SWITCH

Check seat memory switch.
Refer to 

ADP-54, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK FRONT DOOR SWITCH (DRIVER SIDE)

Check front door switch (driver side).
Refer to 

ADP-58, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT SLIDING