|
|
SEAT MEMORY INDICATOR ADP-77 < COMPONENT DIAGNOSIS > C D E F G H I K L M A B ADP N O P Is the inspection result normal? YES >> GO TO 5. NO >> Replace seat memory switch. Refer to ADP-137, "Removal and Installation" . 5. CHECK SEAT MEMORY INDICATOR CIRCUIT 1. Disconnect driver seat control unit connector. 2. Check continuity between driver seat control unit harness connector and seat memory switch harness 3. Check continuity between driver seat control unit harness connector and ground. Is the inspection result normal? YES >> Replace driver seat control unit. Refer to ADP-136, "Removal and Installation" NO >> Repair or replace harness. Component Inspection INFOID:0000000003759210 1. CHECK SEAT MEMORY INDICATOR 1. Turn ignition switch OFF. 2. Disconnect seat memory switch connector. 3. Check continuity between seat memory switch terminals. *: For a digital tester. NOTE: When checking by an analog tester, the polarity (+) and ( − ) become inverse. Is the inspection result normal? YES >> INSPECTION END NO >> Replace seat memory switch. Refer to ADP-137, "Removal and Installation" . Driver seat control unit Seat memory switch Continuity Connector Terminal Connector Terminal B452 25 D13 6 Existed 26 7 Driver seat control unit Ground Continuity Connector Terminal B452 25 Not existed 26 Terminal Continuity Seat memory switch (+)* (-)* 5 6 Existed 7 |