|
|
содержание .. 18 19 20 21 ..
ADP-72 < DTC/CIRCUIT DIAGNOSIS > DOOR MIRROR REMOTE CONTROL SWITCH DOOR MIRROR REMOTE CONTROL SWITCH CHANGEOVER SWITCH CHANGEOVER SWITCH : Description INFOID:0000000009720709 Changeover switch is integrated into door mirror remote control switch. CHANGEOVER SWITCH : Component Function Check INFOID:0000000009720710 1. CHECK CHANGEOVER SWITCH FUNCTION Check the operation on “MIR CHNG SW-R” or “MIR CHNG SW-L” in “DATA MONITOR” mode with CON- Is the inspection result normal? YES >> Changeover switch function is OK. NO >> Refer to ADP-72, "CHANGEOVER SWITCH : Diagnosis Procedure" . CHANGEOVER SWITCH : Diagnosis Procedure INFOID:0000000009720711 1. CHECK CHANGEOVER SWITCH INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect door mirror remote control switch connector. 3. Turn ignition switch ON. 4. Check voltage between door mirror remote control switch harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> GO TO 2. 2. CHECK CHANGEOVER SWITCH CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect automatic drive positioner control unit connector. 3. Check continuity between automatic drive positioner control unit harness connector and door mirror 4. Check continuity between automatic drive positioner control unit harness connector and ground. Monitor item Condition MIR CHNG SW-R/L When operating the changeover toward the right or left side. : ON Other than above. : OFF (+) (–) Voltage (V) (Approx.) Door mirror remote control switch Connector Terminal D14 10 Ground 5 11 Automatic drive positioner control unit Door mirror remote control switch Continuity Connector Terminal Connector Terminal M75 2 D14 11 Existed 14 10 |