|
|
содержание .. 1020 1021 1022 1023 ..
COOLING FAN EC-1217 < DTC/CIRCUIT DIAGNOSIS > [R9M] C D E F G H I J K L M A EC N P O 8. CHECK COOLING FAN RELAY-2 EC-1217, "Component Inspection (Cooling Fan Relay)" . Is the inspection result normal? YES >> GO TO 9. NO >> Replace malfunctioning cooling fan relay. 9. CHECK COOLING FAN MOTOR EC-1217, "Component Inspection (Cooling Fan Motor)" . Is the inspection result normal? YES >> GO TO 10. NO >> Replace malfunctioning cooling fan motor. Refer to CO-76, "Removal and Installation" . 10. CHECK INTERMITTENT INCIDENT Perform GI-44, "Intermittent Incident" . Is the inspection result normal? YES >> Replace IPDM E/R. Refer to PCS-60, "Removal and Installation" . NO >> Repair or replace error-detected parts. Component Inspection (Cooling Fan Motor) INFOID:0000000011058655 1. CHECK COOLING FAN MOTOR 1. Turn ignition switch OFF. 2. Disconnect cooling fan motor harness connector. 3. Supply cooling fan motor terminals with battery voltage and check operation. Is the inspection result normal? YES >> INSPECTION END NO >> Replace cooling fan motor. Refer to CO-76, "Removal and Installation" . Component Inspection (Cooling Fan Relay) INFOID:0000000011058656 1. CHECK COOLING FAN RELAY 1. Turn ignition switch OFF. 2. Remove cooling fan relay-2. 3. Check the continuity between cooling fan relay-2 terminals as per the following conditions. Is the inspection result normal? YES >> INSPECTION END NO >> Replace cooling fan relay. Cooling fan motor Condition Terminal + – 1 2 Cooling fan motor operats Cooling fan relay-2 Conditions Continuity + − Terminal 1 2 12V direct current supply between termi- Existed No current supply Not existed |