|
|
Content .. 1052 1053 1054 1055 ..
Terminal Check item Check condition Normal 22 Input from driver's door lock actuator Driver's door lock: Unlocked 0 volt 23, 24 - - - CONNECTOR: C-304 ZC6019660000 Terminal Check item Check condition Normal 1 Stop light switch power supply Stop light switch: ON Battery voltage 2 Input from transmission range Selector lever: R Battery voltage 3 Output to position light (LH) When position light is illuminated Battery voltage 4 - - - 5 Output to windshield wiper (HI) When windshield wipers are operating at Battery voltage 6 Output to windshield wiper (LO) When windshield wipers are operating at Battery voltage 7 Output position light (RH) When position light illuminated Battery voltage 8 Input from windshield wiper auto When windshield wipers are operating Battery voltage 9 Output to front and side turn-signal When front and side turn-signal light (LH) Battery voltage 10 Output to engine control module Ignition switch: ON Battery voltage 11 Input from engine control module Engine: Started 0 volt 12 Output to windshield wiper (ACC) Ignition switch: ACC Battery voltage 13 Output to windshield washer When windshield washer is operating Battery voltage 14 Output to rear washer output When rear washer is operating Battery voltage 15 Output to engine control module Ignition switch: START Battery voltage 16 Output to front and side turn-signal When front and side turn-signal light Battery voltage CONNECTOR: C-307 ZC6019670000 ETACS 54Ad-95 CHECK WITH TERMINAL VOLTAGE |