|
|
MULTIPORT FUEL INJECTION (MFI) DIAGNOSIS TSB Revision MULTIPORT FUEL INJECTION (MFI) <2.4L ENGINE> 13A-653 (4) Measure the voltage between terminal 21 and ground. • The voltage should measure between 4.9 and 5.1 volts. (5) Turn the ignition switch to the "LOCK" (OFF) position. YES : Go to Step 5. STEP 4. Check PCM connector B-20 for loose, corroded or Q: Are the connector and terminals in good condition? YES : Go to Step 16. GROUP 00E, Harness Connector Inspection AC211192AB SPECIAL TOOL 23-PIN AC306248 B-20 HARNESS CONNECTOR: COMPONENT SIDE AB B-20 CONNECTOR: B-20 PCM AIR |